Stems

Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g

Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.

- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos

An adjustable stiffness suspension stem that smooths out the ride by reducing the affects of impacts and road vibrations. - Unwanted vertical movement is absorbed by twin interchangeable elastomers - Stem retains torsional rigidity - Travel is limited to 1-2 centimeters - Made with 6061-T6 Aluminum - Includes 5 swappable elastomers (2 pre-installed, 3 additional) to customize the ride feel for your bike, weight, and riding style

eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm

Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - 55mm wide clamping platform

The Cavity stem was developed with pain staking focus on strength, function and attention to detail. Tapered body for cleaner lines and weight reduction, multiple internal and external machining processes to reduce every gram possible and chamfered edges throughout for stunning detail.

The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.

Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish

A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)

Ritchey's 4-Axis Adjustable Stem features a precision 3D-Net shaped forged shaft that interconnects with a precision broached clamp to create the strongest, lightest, most secure adjustable stem available. - Stainless steel bar and steerer clamp bolts - Stack Height: 40 - Weight: 219g

The Ritchey WCS Trail Stem represents Ritchey's first stem specifically designed for today's 5-6-inch travel trail bikes using wide bars. More than just a beefed-up version of other stems, with the Trail stem we revised the patented C260 clamp to a 220-degree version that fits a wider variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitor's designs. Using 3D Forged 2014 alloy, the WCS Trail Stem serves up superior strength while remaining lightweight. The extra-wide bar clamp takes stiffness to the next level, fits most riser bars, and ensures plenty of confident control out on the trail. - Material: 3D Forged 2014 alloy - Angle: Zero rise - Steerer Height: 45mm - Faceplate Width: 40mm - Steerer: 1-1/8” - Ritchey Blatte finish - 115g (70mm)

The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness

You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)

You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)

Precision 3D-Net shaped forged shaft interconnects with a precision broached clamp to create a strong, light, and secure stem offering +/-55 degrees range of adjustment. - Adjustable from +40 to -32 degrees - Stainless bar and stem clamp bolts

Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6

Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes

Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment. - Updated distinctive Zipp cosmetics - Designed using SRAM Exogram technology - New SL Speed Stem weighs just 123g (100mm) - ±6° carbon stem - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated mount available separately

- Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: +17 degrees, -17 degrees - S.H.I.S. Stem Clamp Diameter: 31.8mm

- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff - Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue - Titanium hardware and lightweight aluminum faceplate - 107g

An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm

Tom Dugan's signature DGN v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)

Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

- 3D Forged and CNC machined from AL7050/T73 - 3D Forged AL6061/T6 faceplate - 4-bolt cold-forged alloy faceplate - Cr-Mo hardware - 40mm fork clamp stack height - 162g (80mm)

The Chester 35 Direct Mount stem is a practical 2-piece design with big bold graphics and that legendary bomb-proof Race Face toughness baked right in. - The Chester 35 direct mount stem is an all new 2 piece direct mount design - Forged and machined from 6061 aluminum - Weight saving single bolt faceplate - Four bolt bar clamp holds bar securely in position. - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which can cause your bar to bend or break

At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D-forged from 2014 aluminum for great strength, with the final refinements carried out by CNC machining. Titanium bolts complete the package. - Semi Integrated Cable routing (SCR) - 3D-Forged and CNC-machined from AL2014 - 4-bolt sculpted SL faceplate

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g