Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$5.95 - $23.95
- Shim adds support to Presta stem used in a Schrader rim
$19.99 - $54.99
$54.99
Up to 64% Off
The Air-Liner is a high-quality polymer insert that replaces a portion of the air volume in the tire. This trait, combined with the shape, provides a tunable system that enhances your ride performance. The Air-Liner sidesteps the traditional compromise of stability vs. grip and allows your tires to remain stable, grippy, and controlled, even at low pressures.
The Air-Liner is designed using a round cross-section with channels on the top and bottom. The top channel provides room for the tunable air chamber that sits directly beneath the tire tread. Upon impact, the corner edges of the channel flex first. This allows the tread to remain flexible, which increases traction without sacrificing impact resistance. The bottom channel allows for easy fine-tuning of the air chamber and allows for full compatibility of all valve core styles. The round cross-section shape mimics the natural shape of the tire and supports a greater contact area within the sidewalls of the tire casing. Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance.
- Protection: Both wheel and tire are protected by the Air-Liner insert. By cushioning impacts from within the tire, your expensive rim remains protected while eliminating flats caused by rim-strike impacts.
- Control: The Air-Liner insert replaces air volume in the tire. The reduced air volume allows the tire to compress and rebound in a more controlled manner compared to standard tubeless systems.
- Performance: Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance.
- Durability: This highly durable polymer material has been tested to a projected life of 2000 hours under normal riding, or 1 full hour of run-flat downhill use under a typical rider.
- Air-Liner increases control, durability, performance, and protection of both tire and wheel.
- Sold individually (single tire).
Compatibility
- Small: 1.9 – 2.25-inch wide tires
- Medium: 2.25 – 2.5-inch wide tires
- Large: 2.5 – 2.7-inch wide tires
- X-Large: 2.7 – 4.0-inch wide tires
$49.99
Don't let flats stop your ride!
The legendary combination of durability, protection, and run-flat performance of Vittoria Air-Liners, made for your favorite tubeless-ready road tires! The Vittoria Air-Liner system provides unmatched bump compliance and impact protection, while ensuring bead lock at lower pressures. In the event of air-loss, the Vittoria Air-Liner Road system is designed for run-flat use. The insert increases the safety of your tubeless set-up by keeping the tire in place even in case of puncture - No risk to ride on the wheels! The Vittoria Air-Liner Road system is compatible with all tubeless road tires on the market. The lightweight material absorbs no sealant, while the proprietary Vittoria tubeless valves eliminates valve clogging. Whether you are training, touring, exploring, or racing, the Vittoria Air-Liner Road system will provide peace of mind and protection for the ride ahead.
The Air-Liner Road bag contains:
- One Air-Liner Road insert
- Two Multiway valves
Sizing recommendation:
- Small, 700 x 23-26mm
- Medium, 700 x 27-29mm
- Large, 700 x 30-32mm
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$49.99
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$40.00
$50.00
20% Off
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$3.50 - $42.00
Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires.
- Suitable for use in tubeless tires and standard tubes
- Designed to seal punctures up to 1/4"
- Stable down to -30 degrees Fahrenheit
- Non-hazardous, non-corrosive, non-toxic
- Contains natural latex
$34.00
Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires.
- Suitable for use in tubeless tires and standard tubes
- Designed to seal punctures up to 1/4"
- Stable down to -30 degrees Fahrenheit
- Non-hazardous, non-corrosive, non-toxic
- Contains natural latex
$44.00
Thin, low viscosity liquid with improved sealing capabilities over the standard NoTubes sealant.
- Twice the sealing crystals compared to standard NoTubes sealant
- XL crystals and standard crystals combine to seal larger punctures
- Stable down to -30 degrees Fahrenheit
- Not compatible with injectors or through valve cores
$20.00 - $34.00
The Product that Started a Tubeless Revolution
Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant.
Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires.
- First choice of riders around the world for tubeless conversion and flat prevention
- Seals punctures up to 1/4-inch (6.5mm) quickly
- Stays liquid 2-7 months for long-lasting protection
- Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C)
- Natural materials, safe for the environment
- Can be injected through valve stems with removable cores compatible with tubes and tubular tires
$24.00 - $42.00
- Tubeless Valve compatible with Stan's ZTR rim
- Sold as a pair
$8.99
$11.99
25% Off
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims.
- Over-sized design provides extra torque when tightening
- CNC-machined from AL-6061 aluminum
$14.99
$19.99
25% Off
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims.
- Over-sized design provides extra torque when tightening
- CNC-machined from AL-6061 aluminum
- Kit includes two 40mm long brass tubeless valves
$11.99
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
$7.99
These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims.
-Concave to allow better engagement of the valve/rim interface
-Oversize to provide extra torque when tightening
-Especially helpful on single-wall rim tubeless setups
-CNC-machined AL-6061
$15.99
Setting up tubeless tires can be difficult. Add a single-wall, flat profile fat rim to the equation, and the setup can be downright frustrating. Problem Solver's oversized Super P-Nut’s help with this. First, the bottom of the nut is concave, so the valve can be pulled further through the rim, creating a better seal. The larger outer diameter of the nut provides better grip and leverage so that you can get the valve tighter than with conventional nuts. It’s like a normal P-Nut. Only more super.
$9.99 - $139.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable
$6.99
Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).
$49.99 - $64.99
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.
$29.99 - $34.99
- The same tubeless valves, now with a Tire Insert air flow system
- 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts
- Upgraded to aircraft grade 7075 aluminum valve stem and cap
- 4mm machined Allen Key slot for easy installation/removal
- Valve core removal tool integrated into valve cap
- Includes multiple rubber bases to optimize fit with multiple rim types
$3.99
Colorful aluminum valve caps for an added touch of swag. Fits all common BMX tubes.
Product Specifications
- Type: Schrader (American) Valve
- Material: 6061-T6 Aluminum
- Weight: 0.1oz
$16.49
The Lezyne Tubeless Pro Plugs are the most reliable solution for repairing a tubeless bike tire tread at home or in a workshop. These innovative mushroom plugs fill the hole and seal the puncture from the tire, maximizing the life of your tire. You can be sure that your repair will hold up even under the most extreme conditions, so you can keep riding worry-free.
The kit includes three sizes of plugs. With two 3mm, two 3.5mm, and two 4.5mm plugs, you can be sure you'll have the right size to fit your tubeless tire. The kit also includes two abrasive pads and two rubber cement tubes to ensure a secure seal.
- Mushroom plugs that fill the hole and seal the puncture from the inside of the tire
- Includes three plug sizes: 3mm, 3.5mm, and 4.5mm, two abrasive pads, and two rubber cement tubes for a secure seal.
- Most reliable solution for repairing tubeless bike tire tread at home or in a workshop.
$25.00
CushCore tubeless air valves are specially designed to work with a CushCore tire insert. The air passageway is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing air flow through the valve.
- Made from CNC machined from 6061 T-6 aluminum, anodized black
- Tapered rubber collar permanently bonded at the sealing interface
- The valve core can be removed to add tire sealant
- Valve locknut with o-ring seal and valve cap are included
- Sold as a set
$149.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride.
- The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants
- A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert
- The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim
- Fits tire widths 2.6 – 3.0" and rims with internal width 32 – 45mm
Includes
- 2 CushCore Inserts
- 2 CushCore Tubeless Air Valves
- 4 Rim Stickers
- Installation Instructions
$78.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride.
- The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants
- The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim
- Fits tire widths 2.6 – 3.0" and rims with internal width 32 – 45mm
Includes
- 1 CushCore Insert
- 1 CushCore Tubeless Air Valve
- Installation Instructions
$149.00 - $150.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride.
- The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants
- A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert
- The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim
- Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm
Includes:
- 2 CushCore Inserts
- 2 CushCore Tubeless Air Valves
- 4 Rim Stickers
- Installation Instructions
$78.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride.
- The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants
- The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim
- Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm
Includes
- 1 CushCore Insert
- 1 CushCore Tubeless Air Valve
- Installation Instructions
$78.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride.
- The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants
- The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim
- Fits tire widths 1.8" to 2.4" and inner rim widths 22mm to 32mm
Includes
- 1 CushCore Insert
- 1 CushCore Tubeless Air Valve
- Installation Instructions
$10.80 - $81.00
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip.
- Concave tip for traction, durability, and longevity
- Aluminum base to save weight
- Compatible with 45NRTH stud insertion tool
- Compatible with all studdable 45NRTH tires
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$9.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products.
- Tire studs sold separately
- POM-injected handle
- Stainless steel barrel
- Thumb and index finger grips for more comfort and control
- Compatible with studs that have a 3.5mm or smaller shaft
Page 1 of 3
Next page