Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$54.95 - $69.95
$54.95 - $69.95
Up to 21% Off
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$29.95
ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura, or mount shifters directly to handlebars independent of brakes. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look.
- MM-ISEV is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC EV brake
- Designed to work with rear (right side) brakes and shifters.
- Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters.
- MM-ISEV is compatible with M9100, M9120, M8100, and M7100 Brakes. Deore M6100 or M4100 brakes will mount but the positioning is not optimal so we would consider them not compatible.
- MM-ISEV, MM-ISII, & MM-MAG: while they will technically mount to a Sram AXS shifter pod, we do not recommend it. With SRAM AXS, the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders.
- Shimano I-SPEC A, Hope, and TRP brakes are not supported.
- Shimano I-SPEC EV to Magura brakes is not supported because of geometric challenges.
- ISII- 22 Clamp is compatible with Shimano XT M8000 and XTR M9000 shifters.
- NOT compatible with Shimano SLX M7000, Deore M6000.
- For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque.
$24.95
Replacement Bar Plugs for the WTC Singletrack Pogie.
- Quick install and removal of pogies via proprietary quarter turn bar plug mounting system
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$34.95
Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package.
- Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap
- Includes 2x sets of anodized to match bottle cage bolts
$24.99
$34.95
28% Off
Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package.
- Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap
- Includes 2x sets of anodized to match bottle cage bolts
$15.95
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA.
- Compatible with 12mm, 15mm and 20mm thru axles and QR
- Machined 7075-T6 aluminum
- Durable anodized finish
- Torque to 40Nm
- Not compatible with 6-bolt rotors and hubs
- Washer included
$15.95
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA.
- Compatible with 12mm, 15mm and 20mm thru axles and QR
- Machined 7075-T6 aluminum
- Durable anodized finish
- Torque to 40Nm
- Not compatible with 6-bolt rotors and hubs
- Washer included
$15.95
So you've converted to a 1x drivetrain but now you have that Direct Mount boss looking lonely. Install one of these covers to clean up that unslightly mount and add some additional Wolf Tooth flair to your bike.
- Installs directly to low direct mount bosses
$29.95
The Wolf Tooth Post To Flat Mount Brake Adapter allows flat mount brakes to be added to a frame or fork that was designed for post mount brakes. This is a vital component for cyclists who want to run a road groupset on a mountain bike frame.
- Please note that this is a +20mm adapter, which means a 140mm post mount native size will only work with a 160mm rotor, just as a 160mm post mount native size will only work with a 180mm rotor, and so on
- Fits on post mount native sizes 140, 160, and 180mm
- Works with rotor sizes 160, 180, and 200mm
- Tested with SRAM and Shimano brakes
- Requires minimum 13mm between top of brake boss to frame/fork
- CNC Machined from 6061-T6 aluminum for strength and light weight
- Includes : (2x) M5x13mm Flat Head bolts for Flat Mount Caliper and (2x) M6x15mm Socket Head bolts for Post Mount
$17.95
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit.
- Designed and manufactured in the Minneapolis, MN USA
- Fits 1 1/8"" steerers only
- Made from 6061-T6 Aluminum
$17.95
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit.
- Designed and manufactured in the Minneapolis, MN USA
- Fits 1 1/8"" steerers only
- Made from 6061-T6 Aluminum
$17.99
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit.
- Designed and manufactured in Minneapolis, MN USA
- Fits 1 1/8" steerers only
- Made from 6061-T6 Aluminum
$17.95
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit.
- Designed and manufactured in the Minneapolis, MN USA
- Fits 1 1/8"" steerers only
- Made from 6061-T6 Aluminum
$17.95
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit.
- Designed and manufactured in the Minneapolis, MN USA
- Fits 1 1/8"" steerers only
- Made from 6061-T6 Aluminum
$69.95
$69.99
On Sale
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$54.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$69.95
The Wolf Tooth ReMote Pro is the most adjustable and refined dropper lever. It can be moved laterally along the handlebar and rotated around the handlebar as can be done with all dropper levers, while also allowing for 48 deg of rotation to set the lever starting point, independent of cable tension – no other dropper lever allows for this to be adjusted. ReMote Pro also has a cable pulley with a cam (oval) shape that provides more leverage at the beginning of the lever throw; this is when dropper posts need more force to open the fluid reservoir valve that allows the post to move. And just like other Wolf Tooth dropper levers, ReMote Pro features a large sealed custom bearing and is machined at Wolf Tooth in Minnesota, USA.
- Machined surface of paddle provides extra grip
- 6061 T6 aluminum construction with Delrin axle
- Large sealed cartridge bearing is shielded from the elements
- Stainless steel bolts for unprecedented adjustability
- Cable clamp won’t pinch or bend cable
- Integrated barrel adjuster is the only plastic component
- Compatible with all cable-actuated dropper posts
- Various clamp options to integrate with brakes from popular manufacturers
$99.95
ReMote Sustain Lever
- Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash
- Cable Kind Clamp does not damage secured cables and features captive hardware
- Only compatible with Reverb Stealths
- Features a leak-proof, robust, and low-maintenance mechanical actuation system
- Easy cable detachment for service, travel or bike shipping
- 40mm reduction in in-frame height compared to Connectamajig Reverbs
$99.95
ReMote Sustain Lever
- Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash
- Cable Kind Clamp does not damage secured cables and features captive hardware
- Only compatible with Reverb Stealths
- Features a leak-proof, robust, and low-maintenance mechanical actuation system
- Easy cable detachment for service, travel or bike shipping
- 40mm reduction in in-frame height compared to Connectamajig Reverbs
$99.95
ReMote Sustain Lever
- Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash
- Cable Kind Clamp does not damage secured cables and features captive hardware
- Only compatible with Reverb Stealths
- Features a leak-proof, robust, and low-maintenance mechanical actuation system
- Easy cable detachment for service, travel or bike shipping
- 40mm reduction in in-frame height compared to Connectamajig Reverbs
$69.95
ReMote Dropper Lever
- Lever pivots on a 21mm ball bearing for smooth operation
- Cable Kind Clamp does not damage secured cables and features captive hardware.
- Includes barrel adjuster for on the fly changes
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.
$21.95
Roadlink Rear Derailleur Part
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
- Tool interface - 4mm hex key
$44.95
The Tanpan brings the range and security of Shimano mountain rear derailleurs to Shimano-equipped drop-bar bicycles. This means a greater gearing range for bigger adventures, better chain security for rough terrain, and lighter weight and reduced complexity for the daily commute. In order to deliver these benefits, the Tanpan amplifies road shifter cable pull to allow for seamless communication with mountain derailleurs. The result is ideal for riders looking to convert their road, gravel, cyclocross, or commuter bike to the simplicity and light weight of a single chainring.
- Not Compatible with Tiagra 4700
- Compatible with most road, CX and gravel bikes
- Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs
- Certain chainring and cassette configurations benefit from a Goatlink
- If the rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule
$29.95
ReMount Dropper Seatpost Part
- Designed to work with cable actuated dropper levers with pivots parallel to the handlebar's center.
- 22.2 Inner diameter for fitment to MTB bars
$57.99
Wheels Manufacturing Angled Spacer Single Speed Conversion Kit is a Shimano- and SRAM-compatible single speed conversion kit with ramped spacers. Additional spacers are included to dial-in chainline. Includes: - (2) - 9mm angled spacers - (6) - 3mm spacers - (2) - 1mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any 1/2 x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain * Does not work acceptably with 10 or 11-speed chains
$47.25
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
Page 1 of 42
Next page