Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Protective/Armor

$88.00 - $259.00 $259.00 Up to 66% Off
The Carve upper protective jersey is designed for heavier terrain and competition. It features a certified Xmatter protective foam where heavy impacts must be absorbed such as back and shoulders. A NockOut absorbent padding protects chest and ribs. A tight fit, an ergonomic cut, and a high level of moisture wicking and breathability, provide the highest level of comfort and safety. iXS protectors meet European safety standard EN1621-1 and EN1621-2 respectively.
$69.00 - $179.00 $179.00 Up to 61% Off
The Flow upper protective jersey is specifically designed for Enduro and Trail riding. It features a certified Xmatter protective foam to protect your spine and larger surface of your back. Two small and integrated stash pockets allow packing most important tools. A tight fit, an ergonomical cut and a high level of moisture wicking and breathability provide highest comfort and safety. iXS protectors meet European safety standard EN1621-1 and EN1621-2 respectively. Key technologies - X-matter: Flexible Viscoelastic polymer absorbs forces upon impact without hindering range of motion. The open cell compound is engineered to withstand multiple impacts in the same region while retaining its shock absorbing properties. -FlexZip: Stretchable and flexible zipper allows garments to move with contours of the body without excess bunching. - Aeromesh: Lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking.
$120.00
POC's Hip VPD 2.0 Shorts protect your tailbone and hips with Visco-Elastic Polymer Dough that is flexible when moving, then turns rigid upon impact. Wear these liners under your DH shorts and you get muscle support, a chamois and peace of mind. They fit well thanks to stretchy fabric and breathe well due to the ventilated mesh.
$130.00
POC's Joint VPD 2.0 DH Long Knee pads throw down full-on crash protection for riders pushing their limits and pushing the sport. They use Visco-Elastic Polymer Dough that forms to your legs and is flexible when moving, that then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies with motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong. The plastic knee cap adds an extra layer of protection and reduces friction with the ground when crashing. The extra length helps in the event of the dreaded slipped pedal strike.
$70.00
Developed for cyclists who want enhanced flexibility, ventilation, and freedom of movement, Joint VPD Air Elbow is a light-duty elbow pad that uses our lightweight and highly impact-absorbent VPD compound. The pad is covered in reinforced stretch fabric and features neoprene antislip to keep the pad in place, even in rough riding conditions. A crash retention strap further increases security on this lightweight and low-profile elbow pad ideally suited to trail riding. - Lightweight and impact absorbing VPD compound - Reinforced stretch fabric - Neoprene anti-slip on the inside - Designed with a low profile - Crash retention strap (CRS) for a comfortable fit - Neoprene anti-slip on the inside
$80.00
Lightweight and flexible padding that is barely noticeable - ideal for riders who want complete freedom of movement and reliable protection. The VPD Air padding is both highly flexible and highly ventilated for optimal freedom of movement, comfort and temperature control. The pad is housed in reinforced stretch fabric that stays securely in place thanks to an inner lining of anti-slip neoprene and an elastic strap with velcro fastening. A low-profile design further supports practicality and comfort, enhancing the barely-there feel of the pads. - Lightweight and impact-absorbing VPD compound - Reinforced stretch fabric - Elastic strap for a comfortable fit - Neoprene anti-slip on the inside - Designed with a low profile
$140.00
The Joint VPD System Elbow is a highly flexible 2ply elbow protector which conforms with international shock absorption standards. The elbow protector features a highly efficient ventilation system and an outer fabric which is made with high tenacity polyamide yarns for low friction and high abrasion resistance. VPD is the perfect material for mountain biking as it wraps around a riders body shape when warm which gives great freedom of movement on a bike. To protect riders during a fall the VPD technology then hardens on impact to help minimize injury. - Extremely flexible and light VPD elbow pad - EN 1621-1 certified shock absorption - Ventilation system constructed within each layer to optimize moisture management and comfort - Low friction polyamide construction high abrasion resistance
$160.00
The POC Joint VPD System Knee is a lightweight, highly flexible protector that works with the body in all riding positions, warming to and moving as one with the body. In a fall, the material hardens, absorbing the force from any impact. The knee protector conforms to the toughest EN 1621-1 Level 2 standards and features a highly efficient ventilation system to stop the wearer overheating. The outer fabric is constructed from high-tenacity polyamide yarns creating a low friction surface with high abrasion resistance. - Extremely flexible and light VPD knee pad - EN 1621-1 certified shock absorption - Ventilation system constructed within each layer to optimize moisture management and comfort - Low friction, polyamide construction with high abrasion resistance
$60.00
The POCito Joint VPD Air Protector provides knee or elbow protection for children as they develop their riding skills in more testing terrain. Designed to stay with your child as they grow, the pads will fit over elbows if they no longer fit over the knees. Featuring our patented VPD Air material for protection, the exceptionally lightweight and well-ventilated protector has a barely-there feel that ensures your child won't get too hot or uncomfortable while out riding trails. The material moves easily with the body for ultimate freedom of movement. The protector is encased in a soft stretch fabric to ensure the pads are comfortable against the skin, and reinforced outer material won't tear even after years of repeated falls. Anti-slip neoprene patches help keep the protectors in place, and Velcro fastenings can be effortlessly operated by children, so it's always easy to get the children's body armor on and off. - Lightweight and highly ventilated children's body armor for knees or elbows - Highly flexible protection to absorb impacts from falls as children hone their trail riding skills - Constructed from our patented VPD Air compound that molds to and moves with the body for ultimate freedom of movement - Elastic straps with Velcro fasteners and neoprene anti-slip patches ensure the body armor sits firmly in place - Reflective patches heighten visibility
$120.00
The VPD Air Flow Knee brings a new level of comfort to protection. Pads have been light and flexible before, but the new VPD Air Flow pads boast a comfortable and secure fit without any burdensome straps and without any scrunching of material as a result of your natural movement on the bike. Simply put, these protectors are developed so you can fit and forget. Inspired by the fit of road cycling bib shorts, the VPD Air Flow Knee stretches long up the thigh for ultimate grip and security, and no movement while you pedal. The slimline pads are certified to EN1621-1, level 1 standards yet are naturally slim, giving a simple aesthetic that combines comfort and absolute flexibility. Just two seams feature on the entire pad, enhancing all-over comfort and maximising flexibility. A tone-on-tone POC logo further enhances the discreet appearance of the pads. Certified protection Protection certified to EN1621-1, Level 1 Standards Lightweight Weighing just 110g per pad, the protectors give a barely-there feel. Low profile The thin pads have no unnecessary bulk, sitting close to the body and ensuring absolute freedom of movement. Minimal seams Just two seams on the entire pad improve next-to-skin comfort Longer leg Stretching higher up the leg, the pads give a comfortable and secure fit similar to that of bib shorts.
$240.00
Flexible, lightweight chest and back protection for every trail ride. Comprising a chest plate and a back plate, the VPD System Torso is constructed without a jacket or vest, giving a heightened level of comfort and freedom. However you wear it, the VPD System Torso gives lightweight, certified protection and versatility. Constructed using a 3D-molding process, VPD System delivers exceptional impact absorbency certified to EN1621 standards while also providing outstanding ventilation. VPD material softens with body heat, providing exceptional freedom of movement for the wearer. However, in an impact, the material hardens, giving outstanding protection. - 3D Molded combination back and chest protection - Certified to EN 1621-3 (chest), EN 1621-2 (back), Level 1 - Minimalistic design with superior protection, no jacket/vest construction required which improves comfort - Large ventilation ports for maximum ventilation and comfort - VPD material for enhanced flexibility and protection - Extra shoulder straps available to buy which supports use as a winter-sports back protector
$199.99
EXCEPTIONAL PROTECTION AND VALUE The Leatt 3.5 Junior neck brace has the same features as the adult version just made specially for smaller riders, it is lightweight, has an adjustable rear thoracic and is super stylish, this makes the 3.5 a great buy. The brace is designed to allow the forces during an accident to be reduced and transferred through the brace into the strong muscles of the body rather than the small fragile bones in the neck. For very small riders, it is impossible to make a large platform neck brace and still fit it on a very small body. You should, therefore, go for the FUSION 2.0 vest with an integrated neck brace. Protect and let them ride with confidence. Next step up would be our 5.5 junior neck brace that offers the same safety but with a lot more adjustability for a custom fit.- Independently lab and rider tested, proven to reduce neck forces and neck injuries through transferring the load during an accident away from the fragile bones in the neck. - *Up to 89% reduction in critical cervical spine injuries - *Collarbone injuries up to 45% MORE likely WITHOUT a neck brace - Engineered collarbone cut-out to keep your helmet rim away from your most fragile bones - Polymer matrix platform allows for the most efficient reduction in neck forces - Optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movement - CoreFlex split rear folding thoracic strut is designed to work with the body's natural movements for a more comfortable fit and break away before applying excessive pressure to the back - Sculptured, split front for improved comfort and fit - CE tested and certified as Personal Protective Equipment 89/686/EEC - Weight: 497g (1.1lbs) - Plastic Free Recyclable Packaging - Sizing: 29.5" - 32.5"
$69.99
Lightweight Hard Shell Protector The Chest Protector 2.5 Mini is CE Certified and designed specifically to protect the youngest riders, equipped with an ergonomically designed buckle as well as adjustable waist straps to ensure a secure fit. With a 3D and close-fitting design, it is comfortable, and the venting helps keep little ones cool while riding. - Can be worn with or without a Leatt Neck Brace - Total Leatt protection score of 3 points - Hard shell protector - CE tested and certified as roost protection: Chest EN14021 - Our 3D design ensures a great fit that is very comfortable - Padded base layer prevents hard shell rubbing on skin - Close fit allows for over or under the jersey use - Liberal venting helps keep rider cool - Recessed areas in both front and back integrates with Leatt neck braces perfectly - Adjustable waist straps for great fit - Ergonomically designed buckles for kids - Weight: 450g (0.99lbs) - Mini Fit: 110 – 134cm, 3ft 7"– 4ft 5"
$139.95
Weighing just 750g, the 3.5 chest protector is the hard-shell product the racers have been asking for. It's slim, lightweight, and has CE-certified impact protection for the chest and back. The 3D multi-layer, multi-plate articulating design proves to be comfortable as well as ventilated. It can work with and without a Leatt Neck Brace. CE tested and certified as impact protection: - Chest prEN1621-3 Level 1 - Back EN1621-2 Level 1 - FIM-Federation International Certified - FFM-French Federation Certified - Very lightweight hard shell and 3DF AirFit ventilated soft impact foam - Our 3D design ensures a great fit that is very comfortable - Ventilation slots for maximum airflow - Removable front and rear plates and BraceOn neck brace fitting system allow over/under the shirt Leatt neck brace fit - Weight: from 750g (1.65 lbs) - Unisex Fit: 70 to 90 kg (154-198lbs)
$289.99
The Leatt DBX 3.5 neck brace is lightweight, has an adjustable rear thoracic strut, and is super stylish. This makes the 3.5 a great buy. The brace is designed to reduce forces during an accident and transfer them through the brace into the strong muscles of the body, rather than the small fragile bones in the neck. Feel protected and ride with confidence. Independent off-road motorcycle study by Great Lakes EMS Inc (Action Sports EMS) show that neck braces offer: - Up to 89% reduction in critical cervical spine injuries - Collarbone injuries up to 45% MORE likely WITHOUT a neck brace Specs - Independently lab- and rider-tested, proven to reduce neck forces and neck injuries - Engineered collarbone cut-out to keep your helmet rim away from your most vulnerable bones - Polymer matrix platform allows for the most efficient reduction in neck forces - Optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movement - CoreFlex split rear thoracic strut is designed to work with the body's natural movements for a more comfortable fit - Adjustable Thoracic strut engineered to break away before applying excessive pressure to the back - Sculptured, split front for improved comfort and fit - Airflow ribbed body padding for optimum ventilation - Free, optional clear chest strap included - CE tested and certified as Personal Protective Equipment 89/686/EEC - Weight: 497g (1.1lbs)
$83.00 - $139.99 $139.99 Up to 41% Off
- Made for the e-xtreme - Hard shell gives protection and ability to slide on hard surfaces - Top and bottom adjustable hook and look fit-strap for customized comfort and security - Rugged Armortex (kevlar blend material) pads covering flights abrasion - Zipper for easy on and off - Active Airflow: 4 layer ventilation system - Technial back mesh for breathability - CE 1621-1 certified to ensure outstanding protection
$50.00 - $79.99 $79.99 Up to 37% Off
More durability. More comfort. More customized fit. Pro-Rugged Knee Guards deliver more, because you demand it. So bring on more trails with sharp branches and rocks. Pro-Rugged Knee Guards are made with the same legendary, soft, ultra-conforming G-Form technology that hardens on impact. But now with much, much more. Featuring SmartFlex: Flexible As You Ride. Hardens on Impact. - Body-mapped impact-absorbing SmartFlex pads - Armortex technology adds durability to your pads and resists tearing or catching - Adjustable fit-strap for customized comfort and security - Ultra-comfortable double-knit compression fabric for extra protection - Extra-wide top gripper distributes pressure and keeps pads in place - Ventilated mesh back keeps you cool and dry - Low-profile bottom gripper keeps pads in place - Soft inner foam keeps pads secure and comfortable on your knees - Machine washable
$70.00 - $119.99 $119.99 Up to 42% Off
More durability. More comfort. More customized fit. Pro-Rugged Knee-Shin Guards are made with SmartFlex—body-mapped, impact-absorbing pads that offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact. So bring on more trails with sharp branches and rocks. - Extra-wide top gripper distributes pressure and keeps pads in place - Armortex technology adds durability to pads and resists tearing or catching - Soft inner foam keeps pads secure and comfortable on knees - Body-mapped, impact-absorbing SmartFlex pads - Extended coverage for shins - Adjustable fit straps for customized comfort - Ultra-comfortable double-knit compression fabric for extra protection - CE 1621-1 certified to ensure outstanding protection - Ventilated mesh back keeps the wearer cool and dry - Machine washable - Low-profile bottom gripper keeps pads in place
$50.00 - $79.99 $79.99 Up to 37% Off
Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - Strap across forearm on elbow guard keeps pads in place - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable
$60.00 - $94.99 $94.99 Up to 37% Off
Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable
$40.00 - $59.99 $49.99 - $59.99 Up to 33% Off
- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage
$50.00 - $74.99 $74.99 Up to 33% Off
Our Pro-X3 line is designed for every rider in mind, from beginners to veterans and anyone in between. G-Form's industry leading SmartFlex protection is flexible as you ride, yet hardens on impact in the event of a crash. And SmartFlex pads are fully waterproof, so machine wash them as needed. - Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage
$40.00 - $74.99 $59.99 - $74.99 Up to 33% Off
- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage
$40.00 - $64.99 $64.99 Up to 38% Off
- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage
$60.00 - $99.99 $99.99 Up to 40% Off
More durability. More comfort. More customized fit. Pro-Rugged Knee-Shin Guards are made with SmartFlex—body-mapped, impact-absorbing pads that offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact. So bring on more trails with sharp branches and rocks. - Extra-wide top gripper distributes pressure and keeps pads in place - Armortex technology adds durability to pads and resists tearing or catching - Soft inner foam keeps pads secure and comfortable on knees - Body-mapped, impact-absorbing SmartFlex pads - Extended coverage for shins - Adjustable fit-strap for customized comfort - Ultra-comfortable double-knit compression fabric for extra protection - CE 1621-1 certified to ensure outstanding protection - Ventilated mesh back keeps the wearer cool and dry - Machine washable - Low-profile bottom gripper keeps pads in place
$79.95 - $84.95
Ultralight, Movement-Friendly MTB Elbow Guards The Enduro D3O Elbow Guard offers our highest level of protection in an ultra-light, pedal-friendly design. The slip-on design with CE-certified D3O impact-absorbing inserts provides you with minimal restrictions and maximum benefits. Features - EN1621-1 Level 1 Elbow including high and low-temperature conditions - CE certified D3O insert for world-leading impact protection - Moisture-wicking, open stretch mesh at back of knee for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Removable D3O Insert for easy washing Construction - 70% PU / 20% polyester / 10% nylon
$79.95 - $84.95
Minimal restrictions, maximized benefits. - D3O® inserts for world-leading impact protection - Moisture-wicking, open stretch mesh for breathability - Anti-microbial treatment reduces odor-causing bacteria - Abrasion resistant elbow panel for added coverage in a fall - Removable - D3O® inserts for easy washing - EN1621-1 Level 1 certified - 76% Nylon 24% Spandex Micro Lycra
$69.95 - $74.95
Our Enduro Elbow Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your elbows safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride. - Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow - Removable D3O elbow inserts for the perfect balance of comfort and protection - Silicone grip top and bottom to hold the guard in place - Nylon, spandex micro lycra
$79.95 - $84.95
Our Enduro Knee Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your knees safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride. - Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow - Removable D3O knee inserts for the perfect balance of comfort and protection - Silicone grip top and bottom to hold the guard in place - Nylon, spandex micro lycra
$79.95 - $104.95
Guards against those elbow blows The Enduro Pro Elbow Guards are designed to give you the confidence of maximum protection against sneaky trail blows from branches and more, while minimizing the extra bulk and weight so you can still move freely. Slide them on and rip down the trail, and in no time you’ll be singing the praises of the moisture-wicking micro-Lycra sleeve that breathes easy and keeps you fresh. The custom-molded D3O® elbow insert will take whatever your next run throws at you, so go ‘bows out, flat out, and shred with confidence in the Enduro Pro Elbow Guards. - Designed to offer maximum protection while minimizing bulk and weight - Moisture wicking micro-Lycra sleeve with nylon mesh forearm panel for increased airflow - Custom molded D3O® elbow inserts designed by and exclusive to Fox - Slip-on design for reduced bulk - Silicon grip top and bottom to hold the guard in place - D3O® elbow inserts are removable for convenient and quick washing - Elbow inserts are EN1621-1 Level 1
Page 1 of 4 Next page