Filter By:
- Lubes/Cleaners (166)
- Tools (662)
- Workstands (43)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance
$44.95
This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move.
- Compatible with any cassette up to and including 12 speed cassettes
- Design and manufactured in Minneapolis, MN USA
- 7075-T6 Aluminum
$19.95 - $29.95
Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools.
- All inserts are 1 inch hex drive interface compatible
- Design and manufactured in Minneapolis, MN USA
- Nickel plated 4140 chromoly steel
$44.95
You know that feeling when you're just rippin' along and you hear the dreaded psssssssssssss sound from your tire? Well have no fear the TCS Tire Plug kit is here. It's easy to use and will get you back on two wheels in no time. More time for miles of smiles, rather than expletives on the side of the road or trail. Yea, we have all been there. The TCS Tire Plug Kit uses durable "Rocket" anchors (because they look like tiny rockets) that stay in your tire and hold the plug in place. You will not lose a plug. The anchor will hold it in place like a ship at dock. But wait... there's more... You can reuse the anchors when you're all done. It's like a treasure chest when you need to swap-out your tires. The Rocket Plug Kit also features an 'Extra Hand' tool under the smaller cap. If you haven't pre-loaded the Rocket, the Extra Hand will temporarily plug the hole and take the pressure off while you prepare your Rockets and plugs. We went through a lot of arguments at WTB to get this thing dialed and man, we are so stoked on how it turned out. We hope you like it as much as we do.
REUSABLE "ROCKET" ANCHORS
Rocket anchors rotate once pushed into the tire and physically prevent the plug from pulling back through the tire when running higher pressure or through heavy cornering like traditional plugs can. Oh, we tried to pull it through, and we were holding up e-bikes from the plug. The anchor remains fixed in place until it’s removed from the inside of the tire and put back in the tool for future use. Reusable and Recyclable! Win, win!
EXTRA HAND
The Extra Hand (because who couldn't use an extra hand every once and a while) stopper can be pushed into the puncture to temporarily stop any loss of air while a rider determines how many tire plugs are needed and prepares to seal it. The Extra Hand can also be used as a reamer to create a more uniform hole for the tire plugs to seal.
COMPACT AND LIGHT
The TCS Rocket Tire Plug Kit is CNC’d from 6061 aluminum alloy with an integrated extra hand tool and plunger. It also has internal storage for four anchors (two large and two small included), and fifteen 1.5mm diameter tire plugs.
Ready to Launch
Rocket anchors can be preloaded with 1-4 tire plugs depending on the terrain and size of punctures riders typically encounter. Preloaded Rocket anchors are then placed on the plunger, ready to launch the moment a puncture occurs. The clock is ticking!
TCS Tubeless
TCS (Tubeless Compatible System) is WTB's standardized tubeless system. When you do get a puncture with a tubeless tire with sealant inside, this is a great way to fix it.
$8.53 - $147.15
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$59.99
Simply mount to a non-adjustable water bottle cage, the Ninja T Mountain has a stealthy built-in tool case and hidden tool that's easily accessed with a simple twist. Included precision full metal 23 function mini tool that is comfortable in the hands for trailside repairs.
- Added Features: Secondary chain link fence, Chain pin breaker, Self-tightening tool
- Bottle Opener: Hardened steel with spoke holder
- Material (Tools): Chrome vanadium steel
- Material (Tool Case): Engineering grade polymer
- Size: 14.5 x 9.8 x 4.8cm / 5.7” x 3.9” x 1.9”
- Weight: 234 g / 8.25 oz (w/ Tool)
Tools:
- 2-L / 2.5 / 3 (2 pcs) / 4 / 5 / 6 / 8 / 10mm Allen wrenches
- T10 / T25 Torx
- #2 Phillips / Flathead screwdrivers
- 14G / 15G / Mavic M7 / Shimano spoke wrenches
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally.
- Repairs large punctures and slices
- Reacts with Stan's sealant to form an instant, airtight seal
- Barbed plastic tip anchors into tire and will not pull out when riding
- Flexible material and laser-cut shape conforms to puncture and bonds with sealant
- Wears off clean, no trimming needed, and can not be felt while riding, even on road tires
- Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover
- Includes two pre-loaded DARTs for sealing multiple and larger punctures
- Clear caps keep DARTs clean and unthread quickly for fast deployment
- Simple and easy to refill
$40.00
When we launched Secret Chain Lube, Josh admitted that the starting point for this product was a hot wax recipe he had used for years with pro teams that had won numerous world and Olympic medals. The idea behind Secret Chain Lube was to bring this technology to a lube that didn't require hot melting, but it turns out many of our customers were already big fans of hot waxing chains, and the requests flooded in for us to release the SILCA Secret Wax Blend...so here it is!
Consisting of highly refined laboratory-grade paraffin and a high concentration of 3 specific sizes of nano-scale Tungsten disulfide, Secret Chain Blend not only acts as a lubricant but actually acts to modify the surface of the chain, filling in all of the crevices of the metal with highly lubricious and wear-resistant tungsten disulfide particles. As a result, chains waxed with Secret Chain Blend and Secret Chain Lube will actually get faster over time and after repeated waxings. Secret Chain Blend is the only hot wax lubricant to have a specifically matched and compatible drip wax that can be used to 'top off' the wax as needed, extending the duration between hot wax applications, and guaranteeing the quietest running drivetrain possible. Using the combination of Secret Chain Blend and Secret Chain Lube can dramatically extend the chain and drivetrain component life (up to 10x).
- 500g / 17.6oz pouch
- The chain should be VERY clean and dry before applying
$65.00
A ratchet wrench is a great tool for speeding fastener installation/removal or for getting at bolts with limited rotational access. The SILCA T-Ratchet Kit is a compact ratchet wrench that can also be configured as a T-Handle or as a bit driver. The magnetic interfaces provide a quick and secure connection of the supplied assortment of S2 steel bits. The low-angle ratchet engagement makes the most of each rotation and can transfer loads far exceeding the torque spec of most fasteners.
- Configurable cold-forged 1/4" bit driver ratchet with magnetic interfaces
- Stainless Steel 1/4" Extension
- Includes S2 steel bits: 2, 2.5, 3, 4, 5, 6mm Hex T10, T20, T25 Torx PH2 Philips
- Waxed Canvas tri-fold carrier with reflective cross-stitch quilting and magnetic closures that double as keepers for steel hardware when opened.
Shimano Genuine Professional disc brake bleed kit
Includes:
- TL-BR002 Funnel unit for ST series Road Brake lever (M7 thread bleed port)
- TL-BR003 Funnel unit for BL series MTB brake lever (M5 thread bleed port)
- TL-BR001 Syringe unit
- 4-pcs set of Bleed Blocks (Piston spacer)
Features:
- New oil spill guard lid with an integrated oil stopper holder
- Improved syringe unit design now using a stronger threaded tube joint and revised locking clip
- Bleeding instructions available for download under 'Documents & Links' below
$38.00
Shimano Genuine disc brake bleed syringe kit
Features:
- Strong threaded tube joint
- Bleed nipple tool
- Locking clip
- Bleeding instructions available for download under 'Documents & Links' below
$19.00
Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port)
Features:
- Oil spill guard lid with an integrated oil stopper holder
- Funnel base
- Bleeding instructions available for download under 'Documents & Links' below
$14.00
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes
- Brake Fluid Type: DOT 5.1
- Bottle Size (Brake Fluid): 4 oz
- Application (Brake Fluid): Disc Brakes
$106.00
- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
- Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
$116.00
- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
- Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
- Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
$55.00
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
$10.00 - $24.00
• Service kits include air can seals and wiper
• Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$49.00
- 50 hour service kit for Deluxe and Super Deluxe rear shocks
- Includes air can seals, piston seal, and glide rings
$17.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$55.00
- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+
$52.00
- RockShox, 11.4118.038.002, Service kit, Monarch Plus B1 2014+
$37.00
Factory service kits for Reba A7 forks
$37.00
Factory service kits for Reba A7 forks
$16.00
RockShox 30mm Seal Kit
$17.00
RockShox Volume Reducer Kits
$85.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$20.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)
$53.00
- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks
- Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals
Page 1 of 29
Next page