Filter By:
Accessories/Parts
(270 matches)

$38.99
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

$12.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

$59.95
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

$12.99
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

$11.99
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.

$39.99
- Updated design, for use with all Saris racks where bikes are secured by the top tube
- Bridges the gap from stem to seat tube, creating a virtual top tube
- Useful on ladies and specialty frames

$49.99
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

$59.99
Saris' Spare Tire Plate is for use with their spare tire racks. Grab the Spare as an extra or replacement part.

$59.00
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof.
FEATURES:
- Carries ladders and lumber with sturdy L-shaped brackets
- Safely holds loads by preventing lateral shifts with grippy ribbed surface
- Holds thicker, taller loads with a higher vertical edge
- Compatible with Yakima crossbars only
- Works well when paired with Heavy Duty Straps (sold separately)
- Set of 4 brackets

$139.00 - $159.00
Yakima Tracks offer easy connectivity, and a low profile when the towers are removed. Combine the Tracks with Yakima Control Towers plus a set of their Landing Pads and you have a versatile, adjustable base for your rooftop car rack system (towers, pads and accessories sold separately). The Tracks come in pairs in 42- and 54-inch lengths with hardware for mounting on sheet metal, and 54- and 60-inch lengths with hardware for use with fiberglass.

$99.00
Super simple, the EasyTop is an instant roof rack. Strap it on top of almost any vehicle to carry up to 80 lbs of long, flat gear – from skis and snowboards to boats and surfboards. It installs in minutes – just loop it through the door frames and buckle it up. The thick padding protects your vehicle and your gear, and the double-latching buckle adds extra security. Traveling out of town? Bring it along and strap it to your rental vehicle.
- Straps on top of almost any vehicle to create an instant roof rack
- Carries us to 80 lbs of gear
- Great for boats, boards, skis, ladders, and other long, flat loads
- Thick structural padding protects your roof and your gear
- Secures easily through door frames with integrated straps
- Double-latching buckle adds security
- Includes two Heavy Duty Straps and tie-down rope

$54.95
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

$19.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

$29.00
An adapter for Kuat's Trio roof rack to make it work for most 9mm (quick-release) fat bike forks. Includes rear tire strap extension.

$19.00
An adapter for Kuat's Trio roof rack to make it compatible with most 15mm thru-axle fat bike forks. Includes rear tire strap extension. Available in 142mm and 150mm-wide models.

$24.99
The lock comes with a burlap bag, dust cap, two keys, and a Kuat keychain bottle opener. Fits all 2" Kuat racks.

$15.00
Kuat's 1.25" to 2" adapter mounts to your 1.25-inch Kuat Alpha, Beta, or Sherpa rack, allowing them to fit a 2-inch receiver. Mounting hardware included.

$14.99
Want to load up a big tire bike on your Kuat NV? You'll need the Strap Extender. It adds some length to the rear tire ratchet strap to keep big tires held down tight.

$34.98 - $80.00
- Adapters for mounting suspension forks to most auto bike racks
- Solution to thru-axle issues or clearance problems between disc brakes & trays

$169.95
This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.

$49.95
The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

$39.99
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.

$29.99
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).

$239.95
Designed for pick-up trucks, this adjustable watersport carrier allows you to hold different sized kayaks, canoes, paddleboards and sailboards; even extra long loads.
- Works with both the Hydro-Glide and Set-To-Go carriers (sold separately)
- Hitch mounted,height adjustable load bars
- Anti-sway design for stable, more secure transport
- Telescoping mast adjusts to truck cab heights
- “58” Thule steel load bar with durable plastic coating
- 2 load straps to help stabilize and hold load
- Works with 2” receivers only

$149.95
Telescoping-width SUP and surfboard carrier with built-in board protection and universal roof-rack compatibility.
- Exclusive telescoping design delivers a custom fit for board widths up to 34" wide
- Dual loading design allows for transport of up to two boards with maximum stability.
- Strong, durable load straps with adjustable wrap-around padding on straps protect board from strap abrasion
- Cushioned weather-resistant base padding protects both SUP and surfboards during transit
- FlipFit bracket fits all Thule Rack Systems, round bars and most factory racks with single reversible mounting bracket

$109.95
Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

$109.95
Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.
Page 1 of 9
Next page