Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$14.99
The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.
$39.99
• Allows the use of downtube shifters on bikes without downtube shifter braze-ons • Compatible with 9/10-speed Shimano shifters • 31.8mm clamp with shims for 28.6mm tubes • Shifters not included
$17.99
The Problem Solvers Compression Plug for 1 1/8-inch Forks is for threadless aluminum and carbon forks. It fits tightly inside the fork and provides easy headset adjustment and a nice, clean look.
$24.99
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.
$39.99
The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.
$17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 10mm wide. This is the right size for most double-chainring setups with a bashguard. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
$24.99
Downtube cable adjusters from Problem Solvers. - Braze-on downtube adjusters for road shifters - Contoured to fit traditional sized steel downtubes - Black Finish
$25.00
These handy Problem Solvers Eccentric Bottom Bracket Shims allow you to fit your existing Eccentric Bottom Bracket into BB shells with inner diameters of 55mm or 57mm. - Anodized black - 6061 Aluminum
$25.00
These handy Problem Solvers Eccentric Bottom Bracket Shims allow you to fit your existing Eccentric Bottom Bracket into BB shells with inner diameters of 55mm or 57mm. - Anodized black - 6061 Aluminum
$39.99
The Problem Solvers GXP Spindle Adapter Kit lets you adapt a GXP crankset to a BB30 or Press-Fit 30 bottom bracket. It's used with the Problem Solvers BB30/Press-Fit 30 Adapter Kit, which is sold separately.
$29.99
The Problem Solvers Handlebar Accessory Mount comes in handy when you don't have enough room on your handlebars for mounting all your accessories. It fits onto all handlebars, holds tightly and gives you 80mm of width for mounting more of your essential devices where they're easy to see and use (photo).
$24.99 - $44.99
The Problem Solvers Head Tube Reducers resize your head tube to accommodate different size forks. These fine aluminum reducers are designed for traditional, external-cup headsets. Please contact us for any questions about compatibility with your bicycle.
$9.99 - $11.99
Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.
$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever
$14.99
The Problem Solvers Inner Chainring Bolts include 5 of the special threaded chainring bolts that fit into the chainring nuts on your crankset to hold the chainrings in place (chainring nuts sold separately). This type is 12.5mm long and made of durable chromoly.
$11.99
The Problem Solvers Locking Headset Spacer is handy during headset servicing for keeping the fork in place when the top cap and stem are removed. It's also great for keeping the fork in the frame when you're shipping your bike in a box, which usually requires removing the stem and bars. This quality piece is for 1 1/8-inch forks and is CNC machined of light, durable 6061 aluminum and has a stainless-steel bolt.
$24.99
The Problem Solvers Micro-Adjustable Headset Spacer goes on the fork (it requires 10mm of clearance on the steerer) and locks in place to retain your headset bearing adjustment. This makes it possible to run your fork and headset without a star nut or compression plug. This 2-part threaded component is made of CNC-machined aluminum with a small bolt for tightening, so it's light and durable.
$12.99
The Problem Solvers Handlebar Clamp Shim adds thickness to a smaller diameter handlebar so it can be used with a larger diameter clamping stem.
$19.99
The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.
$40.00 - $69.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters
$34.99 - $69.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.2 connects Shimano I-Spec A/B brake to I-Spec II Shifter. - Made from CNC Machined T6061 Aluminum - Anodized Black - Includes all necessary hardware for both I-Spec A and I-Spec B brake - No additional hardware needed
$15.99
The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.
$14.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$7.99
The Problem Solvers SpaceOuts Set includes 2 5mm hex bolts and spacers that let you add space between your bottle cage and frame. This comes in handy on frames with clamp-on front derailleurs and tight clearance for cage mounting.
$11.99
The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.
$19.99
The Super Booster rear hub spacer kit is designed to give your 148mm rear thru-axle hubs the extra boost they need to fit any 157mm frame.
$20.00
For riders who appreciate an elegant and streamlined setup, the Stem to Top Cap Tapered Spacer features a slight taper toward the top, allowing it to transition seamlessly to the Top Cap. - Anodized aluminum construction, no logos - Sold in packs of ten - 4mm outer diameter at base tapers to 32.5mm outer diameter at the top - S.H.I.S. Stem Clamp Diameter: 28.6
Previous page Page 2 of 2