Skip to main content

NEW STORE HOURS - EFFECTIVE IMMEDIATELY

TUES - FRI 10 a.m. - 6 p.m SAT 10 a.m. - 4 p.m.

CLOSED SUN & MON

Filter By:

  • Show More Brands

  • Show Fewer Brands

Handlebar Grips/Tape

ODI Lock-On Grip Clamps
$16.49
- Aluminum clamps secure the grip on both ends with a hex-broach pinch bolts - For 22.2mm (7/8") bars - Packaged for 1 pair/set of grips and includes Snap Cap end plugs
ODI Rogue Lock-On MTB Grip Core
$16.49
The Rogue grips feature soft, large raised pads to provide extra shock absorption. - Made in the USA by ODI - Lock Jaw clamps sold separately
ESI Racer's Edge Grips
$16.99 - $18.99
Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included. - 50 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 30mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
SDG Slater Jr. Grips
$16.99
- 1-piece, integrated Lock-On grip. - Exclusively fits 19mm bar ends. - Dual Density Design. - Smaller 25-26mm outer diameter. - Smaller 115mm length. - Tapered and slotted core to eliminate slippage. - Plush SDG Icon pattern for superior grip control and vibration dampening.
Profile Design Shock Bar Wrap
$17.00
Give your bike some personality and a super comfy ride with Profile Bar Wrap. The gel cushion damps vibration better and leaves you fresh so you can go longer. It comes in many colors for customizing your ride. And, with extra stretch and length, it's easy to install, too.
Zipp Handlebar Gel Pad Set
$17.00
Zipp’s Handlebar Gel Pad Set is a fast, easy way to minimize the countless bumps and vibrations from riding on less-than-perfect roads. This pack of two precision-shaped silicone gel contours to the tops of drop-style handlebars. Without tape on the bar, roll back your brake hoods and place the specially designed gel strips on the top of the bar from where the brake is attached to the handlebar. Simply rewrap your bar tape over the gel and enjoy the smooth ride.
ODI Aluminum End Plugs
$17.95
- Made from 6061 aluminum for durability and long lasting protection - Includes heavy duty hardware to eliminate weak points - Designed with the double sliding wedge system to accommodate a wide range of handlebar id's - Machined pockets on inside of plug allow plug to nest on the handlebar for a more secure fit
SDG Thrice 31 Grips
$17.99
- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends
SDG Thrice 33 Grips
$17.99
- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends
ODI F-1 Series Float Grips
$18.95
F-1 Series Float Grips are made from our exclusive A.I.R.E. compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Micro-textured surface pattern improves tackiness and control - Smooth profile for a consistent feel
ODI F-1 Series Vapor Grips
$18.95
F-1 Series Vapor Grips are made from our exclusive A.I.R.E compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Added surface pattern provides improved grip in all conditions - Ergonomic finger cutouts for a better gripping surface and improved control
Renthal Push-On Grip Ultra Tacky
$18.95
- Knurled grip section for ultimate control - Block pattern outer edge for durability - Medium flange for added control and shifter compatibility - 135mm length - Secure, expander end-plugs - The Ultra Tacky compound gives ultimate control in all conditio
ESI Chunky Grips
$18.99 - $29.99
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
PNW Components Loam Grip
$19.00
We can't promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all-new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter and long days in the saddle. The Loam Grip features two contrasting patterns, and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip's surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design combats compound deterioration, ensures the grip is absorbing more vibration, and provides needed structure to support the additional body weight pressing down on this area. The Loam Grip was purpose-built for Enduro/Trail riding, and with that in mind, picking the compound was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. We call this the "happy camper" blend because it strikes a balance between an ultra-soft material that wears too quickly and a harder compound that provides no tactile benefits. - Diameter: Avg. 30mm - Weight: 90g/pair - Width: 133.5mm - Durometer: 25A Happy Camper Compound - Clamp Style: Closed End, single clamp
Profile Design Karbon Bar Wrap
$19.00
Give your bike some personality and a comfy ride with Profile Karbon Bar Wrap. The simulated carbon look adds some style to your ride. With extra stretch and length, it's easy to install, too. Plus, it comes with Profile's Karbon plugs.
Planet Bike Trippy Grips
$19.99
Planet Bike's Trippy Grips offer the same sweet grip as a tennis racket or golf club, with major style to boot. The soft cores damp vibrations to keep you feeling great and these great grips also become tacky when wet for a safe grip in all riding conditions.
Supacaz Grizips
$20.00
Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores. - Material: Dual-density high-performance rubber - Supacaz pattern design for max control and ultimate tackiness - Diameter: 32mm - Star Ringz: 100% Aluminum - Anodized/powder coated - Laser-etched
Supacaz Grizips Splash
$20.00
Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores. - Material: Dual-density high-performance rubber - Supacaz pattern design for max control and ultimate tackiness - Diameter: 32mm - Star Ringz: 100% Aluminum - Anodized/powder coated - Laser-etched
Supacaz Siliconez
$20.00
Siliconez are the grip of choice for top world cup XC racers looking for both weight savings and performance. Feeling is believing with Supacaz’s patented memory foam attributes that mold to your hand providing consistent grip in any condition. The shock-absorbing qualities reduce fatigue of not only hands but the entire upper body. - Material: Silicone Foam - Diameter: 32mm(sl), 34mm(xl), 36mm (xxl) - Length: 130mm - UV resistant - Latex-free
Spank Spike Grip 30
$21.99
- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 30 - Weight (g): ±115g / Pair
Spank Spike Grip 33
$21.99 - $25.90
- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 33 - Weight (g): ±115g / Pair
SRAM DoubleTap Lever Hoods
$22.00 - $33.00
Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.
WTB Wafel Clamp-On Grips
$22.95
- Large blocks of conforming rubber cover the entirety of the Wafel grip, while ample spacing allows them to smush independently for increased grip while also providing an exit channel for muck and water - 130mm length and 30mm diameter is good for hands of all sizes - Single lock on clamp holds the grip firmly in place
ESI Extra Chunky Grips
$22.99
The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
MSW HBT-210 Anti-Slip Gel Bar Tape
$22.99
MSW anti-slip bar tape provides positive contact with your handlebars and exceptional comfort during your most demanding rides. The flexible PU material makes this tape easy to install while the gel backing provides added comfort and clean hassle-free removal. - PU material with anti-slip coating improves grip over traditional cork material - Gel backing provides vibration damping and extra comfort - Silicone adhesive for easy install and clean removal - 78 inches (200cm) per roll - Finishing strips and bar end plugs included
Race Face Getta Grip
$22.99
Everything's Alright We think that the best path to a happy life is to ride as often as possible. These grips have the perfect combination of tackiness, durability, and cushioning to keep you in the saddle and on the sunny side of life. Special Recipe These grips are made of a proprietary rubber compound that only Race Face can make. We could tell you what's in them, but then we'd have to kill you. Hold Fast Designed to stay put, these low-profile grips have a lock-on collar, tapered internal sleeve and directional design—no drama here, just solid comfort. A Real Handful. Two diameters (30mm+ 33mm), 5 solid colors, 5 black with ano'd lock collar options. Don't worry—with the Getta Grip you get all the choices.
SRAM Locking Grips (For Grip Shift)
$23.00 - $27.00
• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.
SRAM Red Gel Handlebar Transition Pad Set
$23.00
- Clear, gel pads provide added shock absorption while positioned between the lever hood and top-handlebar transition under handlebar tape - Two, left and right sets with integrated channels for either inside or outside, under tape cable routing
Deity Components Knuckleduster
$23.99
The grip of choice for World Cup-style assassin and gloveless wonder, Sam Blenkinsop, the KNUCKLEDUSTER embodies our attention to detail and our focus on function! Not only have we developed our TRC rubber blend that gives you remarkable grip with incredible durability, the KNUCKLEDUSTER also features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and, coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel in a stunning package. Featuring a mushroom pattern to minimize vibration, the true magic of the KNUCKLEDUSTER lies in the V channel chevron ribs that ergonomically fill the swell of your palm and then seamlessly transition to a recessed half waffle on the underside. Why is this magic? All half waffle patterns are outboard and are notorious for creating hot spots on long rides. By designing the top to seamlessly transition to a recessed half waffle pattern, your fingers sit perfectly into the grip and allow you full control even in the roughest of conditions without being plagued by hot spots or blisters. The KNUCKLEDUSTER grips truly are an "all day grip" that allow you to keep it Pinned Wide Open at all times! - The benchmark in grip design - DIRT MAG Top 100 Product for 2018 - Featuring DEITY TRC rubber compound for exceptional durability - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black-ano 6061-T6 aluminum clamps - Short and wide rib design for added comfort with no side-to-side play - Half-waffle recessed design for added control without hot spots - Chevron v-channel design for your palm swell to give an ergonomic feel - Seamless transition through the end of grip for comfort - 132mm length with 32mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle and DH - 101 grams for the set
Deity Components Lockjaw
$23.99
With sweeping transitions from the padded thumb area to the deep-dish diamond top pattern to a recessed half-waffle, the LOCKJAW delivers a technically precise feel from end to end. Utilizing our TRC+ rubber compound allows us to maintain industry-leading durability delivered in a soft, plush, and sticky durometer. By combining our tapered inner sleeve and single lock ring system, coupled with our new extra-grippy rubber and recessed half waffle, the LOCKJAW gives you an extremely responsive-feeling cockpit. If you are looking for the ultimate control at your fingertips, the LOCKJAW continues to elevate the renowned DEITY Grip line to new levels. - Padded thumb area for comfort and smooth transitions - Recessed half-waffle design for added control without hot spots - Deep dish DEITY diamond pattern compresses for comfort but also provides unrivaled traction - Featuring soft DEITY TRC+ rubber compound for durability and increased grip - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black-ano 6061-T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 132mm length with 32mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice! - 104 grams for the set