Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Mountain

Pivot Cycles Switchblade v4
$5,499.00 - $8,599.00
The sequel to the Switchblade story heralds a new era of all mountain riding, with more travel, unrivaled versatility and progressive geometry. It unleashes dominance over enduro inspired descents, generates speed, and delivers the finesse needed for power moves on technical climbs. With a masterfully designed new dw-link™ shock layout, riders can optimize suspension performance like never before. The all-new Switchblade cleans the impossible, threads the needle, and delivers the freedom to explore. From bike park flow trails to raw backcountry routes, the Switchblade amplifies every rider's skills and excels on any trail. We tailored every detail of the Switchblade to deliver a bike that’s ready to conquer the entire mountain. Progressive geometry broadens the performance envelope while retaining the versatility that made the original so good. Always with an eye on confidence-inspiring design, we shortened, straightened, and steepened the Switchblade’s seat tube to allow for longer travel dropper seat posts. The all-new compact frame design reduces weight and increases stiffness, but perhaps best of all, it allows for greatly reduced stand over height across a broad range of sizes. With an industry-leading fit philosophy, the Switchblade offers an ideal fit for riders from 5’ to 6’7” tall. The Switchblade was already a bike ahead of its time and the new Switchblade pushes the versatility envelope even further. It doesn’t matter if you want to run 29er wheels, 27.5" X 2.8” plus tires or even a 29”/27.5” combo – the Switchblade can be perfected for all. A new flip chip with two settings means there isn’t any compromise in geometry. Choose the geometry that best fits your setup or handling preferences. The all-new Switchblade’s extraordinary versatility and category bending capability redefine performance across every type of trail.
Kona Process X DL
$6,999.00
If the Undertaker rode a mountain bike, he’d undoubtedly ride the Process X DL. Aimed at nothing but ripping riders on the most technical of terrain, the Process X DL is a monster on the trails. A full carbon frame features the all-new RockShox Zeb Ultimate RC2 fork with 170mm of travel and a RockShox Super Deluxe Ultimate rear shock boasting 161mm of travel. A SRAM XO1 Eagle drivetrain provides maximum range when hitting the liaison stages between trails. We tossed on some ultra-burly Maxxis EXO+ casing tires—Assegai front and Minion DHR II rear—for the rough stuff. SRAM Code RSC brakes provide mega stopping power, but who needs brakes when you're this busy hauling ass? Kona Carbon Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability, and—finally—weight stipulations that we expect from our bikes. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
Norco Revolver HT AXS 100
$6,999.00
Modern cross country mountain bike racing has changed, so we re-designed and optimized the Norco Revolver HT to carry cross country racers to the top of the podium. The rider-centered design makes the most of every pedal stroke, while the precise engineering of the lightweight, efficient frame will transmit every Watt you produce into conquering today’s physically demanding XC courses. The World Cup caliber RockShox SID Ultimate 100mm fork soaks up the bumps, and the RockShox Reverb AXS dropper seatpost gets the saddle out of the way when the going gets rough. Featuring SRAM’s revolutionary AXS wireless electronic shifting and dropper post actuation, the Revolver HT AXS is the ultimate iteration of our fastest, lightest XC hardtail. With SRAM Level brakes, DT Swiss M1700 Wheelset and tubeless Schwalbe Racing Ray 29x2.25” tires, you’ll be hard-pressed to find any opportunity for upgrades — or any excuses for not riding your best race. - Carbon XC Race frame - RockShox SID Ultimate Carbon 100mm fork - SRAM AXS 12-speed drivetrain - DT Swiss M1700 wheelset - SRAM Level TLM hydraulic disc brakes
Pivot Cycles Mach 4 SL Pro X01
$6,999.00
The all-new Mach 4 SL is designed to let World Cup level athletes capitalize on every inch of increasingly technical courses and generate speed where others hesitate. Our engineers have pushed the boundaries in every conceivable metric of cross country performance. It’s the lightest, fastest 100mm travel XC race bike we’ve ever developed. Go ahead, turn yourself inside out and leave it all out on the race course because the new Mach 4 SL leaves nothing on the table. Cross country racers know that every gram counts. Pivot’s engineers didn’t set out to cut a few grams – they insisted on slashing hundreds. Starting at 1930 grams (including shock), the Mach 4 SL takes a front row seat in the ultralight full suspension category and has the best stiffness to weight ratios we’ve ever created. The new Mach 4SL is over 300 grams lighter than its feathery predecessor, the Mach 429 SL - that’s ¾ of a pound! Optimized tube shapes, a more compact frame design, exotic hi-mod materials, and a dual upright, reinforced swingarm push strength and stiffness while allowing weight to be shaved everywhere. More weight evaporates with an integrated headset and race-proven carbon suspension bearing pockets that leave almost no metal in the frame. Steep climbs and sharp accelerations never felt so good – or fast. The Mach 4 SL frame features full Fox Live Valve integration for next level cross country suspension. Live Valve’s electronically activated suspension system senses impacts and knows when you’re climbing or descending. It reacts to the terrain 100 times faster than the blink of an eye, so you never feel the system actuating; the suspension is just perfect all the time. The system automatically activates tens of thousands of times during a race or ride for the ultimate in pedaling efficiency and control in rough terrain without any rider input. Plus, five different settings ranging from Pro level World Cup firm to trail riding plush are a mere push of a button away. The efficiency benefits are undeniable, and the speed gained on every part of the course is truly mind-blowing. Proper fit is critical to maximizing our body’s output, so we made sure the Mach 4 SL fits the widest range of riders and all genders without compromise. The extra-small size fits riders down to 4”10” with a lower standover height than even our Mach 4 Carbon with 27.5” wheels, and the extra-large size fits riders up to 6’7” tall. A shorter stack, longer reach, and steeper seat angle put you in a powerful position to churn out the watts mile after mile. Size-specific carbon layups and shock tunes make sure all riders experience the same cutting edge performance and ride across the size range. Technical features and dropper posts are now a common part of World Cup cross country racing, so geometry needs have evolved. The Mach 4 SL comes with a slacker head angle, longer reach and shorter stays for a whole new feel and confidence on fast, tricky descents. What was formerly sketchy, steep and nervous is now stable, planted and responsive - traits that cut precious seconds off lap times and save energy for that final sprint to the line. What’s more, the new school geometry also lets this cross-country race bike flirt with trail bike versatility outside of the course tape. If fast is fun, this might be the most exciting bike we’ve ever made. The shock layout may be different, but the 100mm travel dw-link suspension keeps its legendary and familiar ride qualities: ultimate pedaling efficiency, reactive to impacts under power, and fully active while braking – its everything you want in an XC race suspension system. New metric shock with size specific tunes provide more support, control, and speed than ever before.
Pivot Cycles Mach 4 SL Pro XT/XTR
$6,199.00
The all-new Mach 4 SL is designed to let World Cup level athletes capitalize on every inch of increasingly technical courses and generate speed where others hesitate. Our engineers have pushed the boundaries in every conceivable metric of cross country performance. It’s the lightest, fastest 100mm travel XC race bike we’ve ever developed. Go ahead, turn yourself inside out and leave it all out on the race course because the new Mach 4 SL leaves nothing on the table. Cross country racers know that every gram counts. Pivot’s engineers didn’t set out to cut a few grams – they insisted on slashing hundreds. Starting at 1930 grams (including shock), the Mach 4 SL takes a front row seat in the ultralight full suspension category and has the best stiffness to weight ratios we’ve ever created. The new Mach 4SL is over 300 grams lighter than its feathery predecessor, the Mach 429 SL - that’s ¾ of a pound! Optimized tube shapes, a more compact frame design, exotic hi-mod materials, and a dual upright, reinforced swingarm push strength and stiffness while allowing weight to be shaved everywhere. More weight evaporates with an integrated headset and race-proven carbon suspension bearing pockets that leave almost no metal in the frame. Steep climbs and sharp accelerations never felt so good – or fast. The Mach 4 SL frame features full Fox Live Valve integration for next level cross country suspension. Live Valve’s electronically activated suspension system senses impacts and knows when you’re climbing or descending. It reacts to the terrain 100 times faster than the blink of an eye, so you never feel the system actuating; the suspension is just perfect all the time. The system automatically activates tens of thousands of times during a race or ride for the ultimate in pedaling efficiency and control in rough terrain without any rider input. Plus, five different settings ranging from Pro level World Cup firm to trail riding plush are a mere push of a button away. The efficiency benefits are undeniable, and the speed gained on every part of the course is truly mind-blowing. Proper fit is critical to maximizing our body’s output, so we made sure the Mach 4 SL fits the widest range of riders and all genders without compromise. The extra-small size fits riders down to 4”10” with a lower standover height than even our Mach 4 Carbon with 27.5” wheels, and the extra-large size fits riders up to 6’7” tall. A shorter stack, longer reach, and steeper seat angle put you in a powerful position to churn out the watts mile after mile. Size-specific carbon layups and shock tunes make sure all riders experience the same cutting edge performance and ride across the size range. Technical features and dropper posts are now a common part of World Cup cross country racing, so geometry needs have evolved. The Mach 4 SL comes with a slacker head angle, longer reach and shorter stays for a whole new feel and confidence on fast, tricky descents. What was formerly sketchy, steep and nervous is now stable, planted and responsive - traits that cut precious seconds off lap times and save energy for that final sprint to the line. What’s more, the new school geometry also lets this cross-country race bike flirt with trail bike versatility outside of the course tape. If fast is fun, this might be the most exciting bike we’ve ever made. The shock layout may be different, but the 100mm travel dw-link suspension keeps its legendary and familiar ride qualities: ultimate pedaling efficiency, reactive to impacts under power, and fully active while braking – its everything you want in an XC race suspension system. New metric shock with size specific tunes provide more support, control, and speed than ever before.
Intense Cycles Primer 29 Pro
$5,699.00
Evolved from excellence, the new INTENSE Primer is "True to the Trail", providing outstanding performance with a striking design that stands out from the crowd while delivering a confidence-inspiring trail ride every time. Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new full-carbon frame, utilizing the latest technology and specifically tailored for each of the 27.5" and 29" wheel-sizes with a hands-on, passionate approach. Complementing the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is well-suited to both long climbs and chunky descents. - Primer 29 Trail Monocoque Carbon Frame - Fox Factory 34 150mm fork - Fox Factory DPX2 shock - SRAM X01/GX Eagle drivetrain - E13 LG1 Enduro Race wheels
Pivot Cycles Firebird 29 Race XT
$5,599.00
Crushes Climbs, Slays Descents...And Rewrites the 29er Playbook Enduro courses. World Cup Downhill courses. It's hard to tell the difference between the two these days. Well, right up until the point when you have to grind your way to the top of the absolute hairball descent—that would be enduro. And that is also where the new Firebird 29 enters the picture—with its speed generating 29er wheels and a penchant for kicking ass. The Firebird 29's big wheels gobble up miles with ease, roll right over the gnar and add insane levels of traction to the mix. But this is no monster truck. The Firebird 29 is a lightweight machine that boasts a poppy, lively feel that long-travel 29ers have never possessed. Until now. Playful Yet Stable The Firebird 29 features a long front center, short chainstays, a low center of gravity, and a decidedly slack 65-degree head angle to deliver unmatched stability and handling. Plus, a new flip-chip adjustment system in its upper linkage offers quick and easy geometry fine tuning. Taking a page from the Phoenix DH Carbon's progressive geometry, the Firebird combines some of the longest reach measurements in the sport, with short, 16.96" (431mm) chainstays. The Firebird's long and low geometry gives you increased stability at high speeds and on steep technical challenges, while its short chainstays provide a maneuverable, dynamic ride that makes it easy to put the bike precisely where you want it. The Bomb-Proof Bantam Weight The Firebird 29 has a lot to live up to. On one hand, it needs to withstand repeated pummelings at bike parks and on the toughest trails. It has to be bomb proof. On the other hand, it also needs to be incredibly light—this bike is meant to give you an edge on the climbs. Since a 29er wheelset inherently packs more grams than the same wheelset in a smaller, 27.5 diameter, we knew there couldn't be any fat on the Firebird 29 frame. So, we made it both bomb proof and lean. Thanks to our own hollow-core, high-compression carbon molding process and an exacting combination of composite materials and shapes, we are able to deliver an ultra-light frame that meets the same stringent testing requirements for strength and stiffness as our World Cup downhill bike. Firebird frames weigh in at a mere 7 pounds (3.2kg) while complete bikes tip the scales at sub-30 pounds(13.5kg).
Pivot Cycles Mach 4 SL Race X01
$5,599.00
The all-new Mach 4 SL is designed to let World Cup level athletes capitalize on every inch of increasingly technical courses and generate speed where others hesitate. Our engineers have pushed the boundaries in every conceivable metric of cross country performance. It’s the lightest, fastest 100mm travel XC race bike we’ve ever developed. Go ahead, turn yourself inside out and leave it all out on the race course because the new Mach 4 SL leaves nothing on the table. Cross country racers know that every gram counts. Pivot’s engineers didn’t set out to cut a few grams – they insisted on slashing hundreds. Starting at 1930 grams (including shock), the Mach 4 SL takes a front row seat in the ultralight full suspension category and has the best stiffness to weight ratios we’ve ever created. The new Mach 4SL is over 300 grams lighter than its feathery predecessor, the Mach 429 SL - that’s ¾ of a pound! Optimized tube shapes, a more compact frame design, exotic hi-mod materials, and a dual upright, reinforced swingarm push strength and stiffness while allowing weight to be shaved everywhere. More weight evaporates with an integrated headset and race-proven carbon suspension bearing pockets that leave almost no metal in the frame. Steep climbs and sharp accelerations never felt so good – or fast. The Mach 4 SL frame features full Fox Live Valve integration for next level cross country suspension. Live Valve’s electronically activated suspension system senses impacts and knows when you’re climbing or descending. It reacts to the terrain 100 times faster than the blink of an eye, so you never feel the system actuating; the suspension is just perfect all the time. The system automatically activates tens of thousands of times during a race or ride for the ultimate in pedaling efficiency and control in rough terrain without any rider input. Plus, five different settings ranging from Pro level World Cup firm to trail riding plush are a mere push of a button away. The efficiency benefits are undeniable, and the speed gained on every part of the course is truly mind-blowing. Proper fit is critical to maximizing our body’s output, so we made sure the Mach 4 SL fits the widest range of riders and all genders without compromise. The extra-small size fits riders down to 4”10” with a lower standover height than even our Mach 4 Carbon with 27.5” wheels, and the extra-large size fits riders up to 6’7” tall. A shorter stack, longer reach, and steeper seat angle put you in a powerful position to churn out the watts mile after mile. Size-specific carbon layups and shock tunes make sure all riders experience the same cutting edge performance and ride across the size range. Technical features and dropper posts are now a common part of World Cup cross country racing, so geometry needs have evolved. The Mach 4 SL comes with a slacker head angle, longer reach and shorter stays for a whole new feel and confidence on fast, tricky descents. What was formerly sketchy, steep and nervous is now stable, planted and responsive - traits that cut precious seconds off lap times and save energy for that final sprint to the line. What’s more, the new school geometry also lets this cross-country race bike flirt with trail bike versatility outside of the course tape. If fast is fun, this might be the most exciting bike we’ve ever made. The shock layout may be different, but the 100mm travel dw-link suspension keeps its legendary and familiar ride qualities: ultimate pedaling efficiency, reactive to impacts under power, and fully active while braking – its everything you want in an XC race suspension system. New metric shock with size specific tunes provide more support, control, and speed than ever before.
Norco Sight VLT A1
$5,499.00
The Sight VLT A1 29 is an aluminum electric All-Mountain bike with Norco’s legendary descending capability and quick, confident climbing that’s delivered with an electric kick. We combined what made the 2019 Sight VLT The Loam Wolf’s e-MTB of the Year with our proprietary Ride Aligned design system, and engineered the aluminum frame around a state-of-the-art Shimano E8000 STEPS e-MTB drive system. With its 630Wh in-tube battery, optional 360Wh range extender compatibility (sold separately) and e-optimized 29-inch wheels, this is the next level in electric mountain bikes. The Sight VLT A1 29 offers 150mm of Rockshox Super Deluxe Select + travel and is equipped with a RockShox Yari RC e-rated 160mm fork. The SRAM SX Eagle drivetrain keeps the power on and Shimano MT520 4-piston brakes slow things down, while the 34.9mm TranzX dropper offers size-specific drop.
Pivot Cycles Mach 5.5 Race XT
$5,499.00
The Ultimate Trail Bike The Mach 5.5 Carbon builds on the legacy of our renowned Mach 5.7 Carbon as the quintessential trail bike. With 140mm of dw-link rear travel, it sticks to and claws up just about anything, with unparalleled pedaling efficiency. On descents, the Mach 5.5 Carbon's incredible square edge bump performance and 160mm travel Fox 36 fork enable you to conquer terrain that makes other bikes cower. It's a bike that inspires you to climb while looking forward to the descents and that begs you to push your limits while putting a smile on your face. Ultra Light. Ultra Strong. Weight matters…and so does strength. The Mach 5.5 Carbon matches Mach 6 Carbon durability while achieving Mach 429 SL Carbon weights. The result is the perfect balance of frame stiffness and ride feel. The frame's carbon structure features our proprietary hollow core internal molding process combined with a highly optimized lay-up design, utilizing lighter weight, high modulus materials that save up to a pound (.45kg) over other trail and enduro bike designs. The Mach 5.5 Carbon is available as a complete bike, with builds weighing under 27lbs (12.2kg) complete with dropper, and with frame weights as low as 5.2lbs (2.35kg). Ultra Capable. The Mach 5.5 Carbon's well-balanced geometry makes it the ultimate trail bike weapon. We combined a long and low cockpit with a 66.5-degree head angle for high-speed stability and amazing downhill performance. The bike's short (430mm) chainstays and relatively steep seat angle help it rail the tightest corners and absolutely crush the steepest climbs. We've also evolved our mid-travel link design. By utilizing the same rear-shock pivot cartridge-bearing design found in our longer-travel models (such as the Firebird and Phoenix), we've given the Mach 5.5 Carbon the unmatched, small-bump compliance and traction that Pivot is known for—in a lighter weight and more compact design.
Pivot Cycles Mach 6 Carbon Race XT
$5,499.00
Consider the Bar Officially Raised Pivot's renowned Mach 6 Carbon is longer, lower, and sets a new benchmark for enduro and aggressive trail bikes. The Mach 6's peerless pedaling efficiency and downhill handling make it the perfect choice for dropping into black-diamond terrain and hitting technical features at race pace. From peak to podium, the Mach 6 Carbon is enduro performance, redefined. Longer, Lower...For Every Size of Rider The Mach 6 features truly progressive geometry—a slacker head angle and long cockpit for stability and poise on the steepest descents, a steeper seat angle to help you scale the worst climbs, and shorter chainstays for snappy handling on the tightest trails. On a lot of bikes "long and low" essentially means "This isn't going to fit you smaller riders". But that's not the case here. Though we went long and low on the new Mach 6, smaller riders still fit the bike easily. That's because our Medium, Large, and X-Large see significant increases in top tube length, while our Small and X-Small models remain compact, in keeping with our rider-size-specific design philosophy. What's more, smaller riders still reap the climbing advantages of the steeper seat angle and the capable descending traits that come courtesy of the slacker head angle. Suspension Perfected We spec'd the Mach 6 with a Fox Factory Kashima Float DPX2 shock, tuned specifically for enduro and trail applications. The Float DPX2 features X2 oil-flow architecture in a lighter, better-pedaling package. The DPX2 also offers an incredibly wide range of tuning options to suit a wide range of rider weights and preferences; those include three on-the-fly lever adjustments—Open, Medium, and Firm options, with an additional adjustment for tuning low-speed compression on the open setting. The EVOL air sleeve on the Mach 6's DPX2 significantly reduces the force required to initiate travel, for the ultimate in small bump compliance and better bottom-out resistance. When combined with the ultra-low friction Kashima coating, this design offers an incredibly plush feel with a wide range of damping adjustments.
Norco Range VLT C3
$5,399.00
The Range VLT 3 is a monster of an e-bike built to smash through tough, burly trails, careen down rock faces, and just go big. Using Norco's holistic approach to fit, geometry and suspension kinematics, the Range VLT 3's unique combination of long-reach, slack head tube angle and steep seat tube angle creates a more forward weight distribution within a longer wheelbase for the ultimate in big mountain, e-Enduro performance. With a 180mm travel RockShox Yari RC fork up front and 170mm in back from a Super Deluxe Select Coil shock, the Range VLT 3 is sufficiently designed for jumps and big drops. It uses 203mm Shimano MT520 4-piston brakes to keep speed in check. The SX Eagle drivetrain and Shimano STEPS E7000 motor with 500Wh in-tube battery, and optional 360Wh range extender, keep the good times rollin'. - Carbon mainframe and seatstay w/170mm rear travel - Shimano STEPS E7000 motor with in-tube 500Wh battery - RockShox Yari RC 180mm, boost, E-Rated, Motion Control fork - RockShox Super Deluxe Select Coil shock - SRAM SX Eagle 12-speed drivetrain - Maxxis Assegai. 2.5” tires
Norco Revolver HT XTR 100
$5,399.00
Modern cross country mountain bike racing has changed, so we re-designed and optimized the Norco Revolver HT to carry cross country racers to the top of the podium. The rider-centered design makes the most of every pedal stroke, while the precise engineering of the lightweight, efficient frame will transmit every Watt you produce into conquering today’s physically demanding XC courses. The World Cup caliber RockShox SID Ultimate 100mm fork soaks up the bumps, and the Crank Bros. Highline dropper gets the saddle out of the way when the going gets rough. Featuring Shimano’s new 12-speed XTR group, the Revolver HT XTR is as fast and as light as an XC hardtail can get. With XTR race brakes, DT Swiss 350/Stans Arch S1 tubeless ready wheels and Schwalbe Racing Ray 29x2.25” tires, you’ll be out of excuses for not riding your best this year. - Carbon XC Race frame - RockShox SID Ultimate 100mm fork - Shimano XTR 12-speed drivetrain w/Race Face Next SL Carbon crankset - Stans Arch S1 rims w/DT 350 hubs - Shimano XTR hydraulic disc brakes
Norco Sight VLT C3
$5,399.00
The Sight VLT C3 is an electric all-mountain whip with amazing descending capability, sure-footed climbing, and trail-charging grip. By taking the ride characteristics of our most popular all-mountain design and adding Shimano STEPS E7000 e-assist and an integrated, 500Wh in-tube battery, the Sight VLT C3 opens up a whole new world of riding possibilities. It features modern, all-mountain geometry with e-MTB-specific components and suspension kinematics for a fast, stable, and playful ride, all of which means the Sight VLT will amplify your ride from bottom to top and top to bottom. - Carbon 150mm travel frame - RockShox Yari RC 160mm, e-bike-rated fork - RockShox Deluxe Select+ Debonair trunnion-mount shock - SRAM SX Eagle drivetrain - Shimano BR MT520 4-piston hydraulic disc brakes
Devinci Troy Carbon 29 GX
$5,000.00 - $5,319.00
No two mountains are the same. And, from the Rockies to the Appalachians, the all-mountain Troy brings badass performance to some wickedly diverse terrain. Designed within Devinci's "Testing is Everything" modus, its fifth generation Split-Pivot platform increases bottom-out force, while its team-inspired geometry tames steep, rugged, and unpredictable terrain. Power up steeps with finesse thanks to an axed-down short chainstays, and harness the stability-enhancing benefits of Super Boost 157 rear-axle spacing for high-speed confidence on the descents. Troy achieves a fun and playful ride by sporting a slightly longer reach but maintaining short chainstays. It does this while still accommodating a larger tire (clearance for 27.5 x 2.8-inch or 29 x 2.4-inch) by utilizing Super Boost rear spacing. The asymmetric carbon frame features molded rubber downtube and chainstay protectors and a threaded bottom bracket to make removal and maintenance a breeze. The low standover height and FRG adjustable flip-chip allow you to dial in your trail tune, and a split pivot rear triangle and metric rear shock further enhance the bike's all-mountain capabilities. - SRAM GX drivetrain - RockShox Pike fork - Race Face AR35 wheels
Rocky Mountain Instinct Carbon 70
$2,300.00 - $5,299.00
Go where you want and own every inch of the trail along the way with the Instinct Carbon 70. Stacked with versatility, this 140mm carbon trail machine features Rocky Mountain's Ride-9 system to tailor the suspension and geometry to suit the day's adventure, giving you the ability to rip through miles of buff singletrack and charge down sketchy lines with confidence. Aiding your capabilities are Fox's outstanding 34 Float Performance Elite fork, Float DPS EVOL Performance Elite shock, and dirt-churning Maxxis Minion DHR II EXO tires to keep you deftly chasing in fun's track, and a SRAM GX Eagle drivetrain for robust shifting performance. Powerful SRAM Guide R hydraulic disc brakes give you impressive control, and with a Fox Transfer Performance Elite dropper post, you're always in the best position to absolutely rail mile after mile of singletrack.
Pivot Cycles Mach 4 SL Race XT
$5,199.00
Gravity Defying Cross Country Rocket Ship The Mach 4 SL is designed to let World Cup level athletes capitalize on every inch of increasingly technical courses and generate speed where others hesitate. Our engineers have pushed the boundaries in every conceivable metric of cross country performance. It's the lightest, fastest 100mm travel XC race bike we've ever developed. Go ahead, turn yourself inside out and leave it all out on the race course because the new Mach 4 SL leaves nothing on the table. Weighty Goals Cross country racers know that every gram counts. Pivot's engineers didn't set out to cut a few grams—they insisted on slashing hundreds. Starting at 1845 grams, the Mach 4 SL takes a front-row seat in the ultralight full suspension category and has the best stiffness to weight ratios we've ever created. The new Mach 4SL is over 300 grams lighter than its feathery predecessor, the Mach 429 SL—that's 3/4 of a pound! Optimized tube shapes, a more compact frame design, exotic hi-mod materials, and a dual upright, reinforced swingarm push strength and stiffness while allowing weight to be shaved everywhere. More weight evaporates with an integrated headset and race-proven carbon suspension bearing pockets that leave almost no metal in the frame. Steep climbs and sharp accelerations never felt so good—or fast. Short or Tall, it Fits Them All Proper fit is critical to maximizing our body's output, so we made sure the Mach 4 SL fits the widest range of riders and all genders without compromise. The extra-small size fits riders down to 4'10" with a lower standover height than even our Mach 4 Carbon with 27.5" wheels, and the extra-large size fits riders up to 6'7" tall. A shorter stack, longer reach, and steeper seat angle put you in a powerful position to churn out the watts mile after mile. Size-specific carbon layups and shock tunes make sure all riders experience the same cutting edge performance and ride across the size range.
Pivot Cycles Trail 429 Race XT 29
$5,099.00
Crazy Fast Meets Ridiculously Capable There's a dizzying range of bikes out there these days—XC, trail, all-mountain, enduro...What if you just want a bike that rips on nearly every trail? This is that bike. The Trail 429 is brilliant just about everywhere. It accelerates and climbs like a cross-country bike yet more than holds its own on tough terrain. We took the original Mach 429 Trail, completely reshaped the chassis, and gave the bike a truly progressive geometry. The Trail 429 is even more capable on technical terrain than its predecessor yet doesn't sacrifice a thing in the quick and nimble departments. Effortless handling, incredible power transfer, and blazing acceleration are what set the Trail 429 apart from so many other trail bikes. Lightweight, Capable, and Perfectly Balanced The best trail bikes are neither whippy nor overbuilt. They are, in a word, balanced. We sweat the details—painstakingly developing the precise mix of resins, composite fibers, lay-orientation, and frame shaping to create a chassis with the perfect blend of strength and stiffness. We've also given the Trail 429 many of the same strength and stiffness-enhancing features that you'll find on our gravity-oriented bikes, including a double-wishbone rear triangle, Super Boost Plus rear axle spacing, ultra-wide suspension linkages, and burly bearing assemblies. With the Trail 429, we've upped the ante on downhill performance without any loss in versatility. Tuned for the Trail Dave Weagle's dw-link design is renowned for providing great traction and downhill control without adding energy-sucking suspension bob or "squat"—that's also why it's the heart of the Trail 429. We've paired that class-leading dw-link suspension with custom-tuned Fox Float DPS (Dual Piston System) that give the Trail 429 120 millimeters of smooth and controlled rear suspension. The metric-sized Fox DPS shock features an extremely positive "firm" position that makes easy work of long fire-road climbs. To match the Trail 429's deep-feeling rear suspension, we've equipped each model with a 130mm Fox 34 suspension fork.
Kona Process X
$4,999.00
The Process X is coming in hot! This gravity-hungry machine features 170mm of front and 161mm of rear travel. With its full carbon frame, an adjustable wheelbase, and the ability to run a 29” or 27.5” rear wheel, the Process X can be customized to the perfect fit. A Shimano XT drivetrain keeps the shifting smooth while ultra-powerful four piston Shimano Deore brakes with 203mm rotors keep the speed in check. When you’re ready to rip, a Fox 38 Performance fork and Performance Elite DPX2 rear shock provide plush suspension. Chunky trails are no match for the front Maxxis Assegai EXO+ TR 3C and rear Minion DHR II EXO+ TR 3C tires. Kona Carbon Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability, and—finally—weight stipulations that we expect from our bikes. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
Norco Sight VLT A2
$4,699.00
The Sight VLT A2 29 is an aluminum electric All-Mountain bike with Norco’s legendary descending capability and quick, confident climbing that’s delivered with an electric kick. We combined what made the 2019 Sight VLT The Loam Wolf’s e-MTB of the Year with our proprietary Ride Aligned design system, and engineered the aluminum frame around a state-of-the-art Shimano E7000 STEPS e-MTB drive system. With its 500Wh in-tube battery, optional 360Wh range extender compatibility (sold separately) and e-optimized 29-inch wheels, this is the next level in electric mountain bikes. The Sight VLT A2 29 offers 150mm of Rockshox Super Deluxe Select + travel and is equipped with a RockShox 35 Gold e-rated 160mm fork. The Shimano Deore 10-speed drivetrain keeps the power on and Shimano MT420 4-piston brakes slow things down, while the 34.9mm TranzX dropper offers size-specific drop.
Pivot Cycles LES Singlespeed
$4,699.00
When LES is More Elegantly simple yet deceptively fast, the LES Singlespeed masters the chess game of riding with one gear. The racy lightweight DNA of the LES SL combined with our proven Swinger II dropout system creates a Singlespeeder's dream ride. Explosive efficiency, precision handling, and all-day comfort—the LES Singlespeed makes the most of every move so that one speed is all you need. Singlespeed Aficionado Approved Best in class stiffness to weight ratio and power transfer that makes the LES SL a race weapon also exists in the DNA of the LES Singlespeed. Powering up the steeps is efficient and rock solid. And, the LES Singlespeed has that legendary Pivot ride quality and compliance that the LES line is known for—the kind that saves energy over the long haul and keeps the bike planted, quiet, and predictable over all surfaces. Uncompromising Singlespeed Performance A little singlespeed magic happens when you combine the unapologetic power transfer of the LES SL with our proven Swinger II dropout system. This patented dropout design offers hassle-free gearing changes and super-fast chain tension adjustments thanks to its indexed adjusters. Swinger II's dual pinch bolt design securely locks the dropouts in place for the ultimate in reliability. And, unlike eccentric bottom brackets, geometry and saddle height are maintained.
Pivot Cycles LES Fat Pro XT w/Pivot Rigid Fork
$4,199.00
Pivot fat bikes are for all season and all surface cycling. Ride where others can't and embrace old man winter with oversized fat tires to enhance traction, floatation, and bump absorption. From Singletrack to Snow—One Bike Rules It All The Pivot LES Fat is the world's most versatile big-tire machine. Compatible with almost every wheel size available, from 26" and 27.5" Fat to 27.5+ to 29er, the LES Fat is a four-season hardtail that can take you from singletrack to snow to sand with no compromises.
Giant Reign Advanced Pro 29 2
$4,000.00
Go fast, get rowdy, nail new lines with total control. We took everything you love about the legendary Reign and re-imagined it for 29-inch wheels. It’s progressive, it’s confident, and it’s born to fly on aggressive enduro style terrain. When it comes to building the ultimate enduro machine, we look to Giant Factory Off-Road Team riders who are out there pushing the limits of their bodies and bikes. This bike is for them—and for everyone else who loves to charge hard. We engineered the geometry of the Advanced composite frame and swingarm around larger diameter 29-inch wheels. That means shorter chainstays, a longer toptube, and just the right angles with the headtube (65 degrees) and seattube (76.8 degrees). Then we gave it an updated Maestro suspension system with 146mm of rear suspension. Aided by a new trunnion-mount shock and Advanced Forged Composite rocker arm, we came up with a system that feels super plush, active and shreddable. Beyond that, the new Reign Advanced Pro 29 features everything you need in a pro-level enduro machine, including a cleanly routed dropper seatpost, the latest Giant WheelSystem with Boost hub spacing, and tubeless tires set up right out of the box. Race-bred suspension Maestro rear suspension developed and tested under extreme conditions of Enduro World Series races. A trunnion mount shock has a longer stroke and smoother feel, and the Advanced Forged Composite upper rocker arm adds stiffness while lowering overall frame weight. The trunnion mount also allows longer dropper posts. Progressive enduro geometry The Advanced-grade composite frameset features updated enduro-style geometry, so you can ride aggressive descents and rail corners with confidence. The 65/76.8-degree headtube/seattube angles with a 42/44mm fork offset produce confident front-end handling with high-speed stability and control. 29er confidence and control Larger 29-inch diameter wheels roll over rugged enduro terrain with improved balance and stability, giving you the momentum to crank up tough climbs and the confidence to fly on fast, technical descents.
Pivot Cycles LES 27.5 Race XT
$3,999.00
Wickedly Fast. Ridiculously Fun. Our line of LES hardtails has been ridden to victory in professional races around the world. The LES 27.5 is a hardtail aficionado's dream machine. Our latest addition to the LES line-up features an ultra-light chassis with BMX-like handling and the rollover advantage of bigger wheels, all in a snappy, fast-accelerating package that fits a wide range of riders. World Cup Performance for Every Size of Rider The LES 27.5 brings uncompromising performance to riders from 4'10" to 6'1". The LES 27.5 is a revelation of optimized geometry, stand-over clearance, weight, and ride tuning. By including sizes Small and Extra-Small in the range, we've got a LES model to properly fit every size rider who seeks bigger wheel performance. Size-specific carbon molds enable us to use smaller diameters and unique carbon layups to build lighter frames that maintain the same high strength in a more compact frame design. The more compact frame design of the LES 27.5 also makes it possible to build a sub-19.4lb (8.79kg) race bike—an advantage for everyone, but even more so for small riders seeking the best power to weight ratio. The New Standard in Hardtail Performance The lightweight LES 27.5 sets a new standard for stiffness and power transfer. Marshaling our proprietary hollow core, internal–mandrel process, and a custom layup incorporating new, high-modulus carbon fibers, we've created a ride-tuned hardtail that transfers your every watt into pure speed. The LES 27.5 features an oversized, box-section downtube and bottom bracket area, stiffness-enhancing Boost 110 and 148 front and rear spacing, as well as meticulously engineered seat and chainstays. Out on the course, those features add up to amazing power transfer, razor-sharp handling, and a surprisingly forgiving ride quality that staves off fatigue and saves you energy on even the longest courses.
Pivot Cycles LES SL Race XT
$3,999.00
The Racer's Edge On the right course, nothing is faster than a hardtail, and nothing delivers the stiffness to weight ratio and raw speed as a Pivot LES SL. The LES SL is engineered to the Nth degree to deliver the kind of handling, extreme power transfer, and low weight that transforms every last watt of output into a race-winning performance. A New Paradigm in Hardtail Performance A tenth of a second gained here, a hundredth there, over and over across the length of an hour and a half long cross country race really add up at the finish line. The LES SL is up to three-quarters of a pound (that's 300 grams!) lighter than it's already svelte predecessor making it a racer's dream that can turn seconds saved into minutes—all while retaining the quality and handling that has pushed Pivot athletes to cross country race wins at the elite level across the world. With new carbon dropouts, an integrated headset, and new layup schedule utilizing Hollow Core Molding Technology and cutting edge carbon materials, the LES SL is by far the lightest hardtail we've ever built. Pivot's race-winning hardtail legacy takes a quantum leap forward with a lighter, faster, and sharper-edged tool with only one goal in mind: getting from point A to point B as fast as possible. Progressive XC Geometry When a bike racks up wins and course records in races around the world and is the weapon of choice for our World Cup XC, Tour Divide, and 24-Hour racers every time the course is smooth and fast, you know that geometry is dialed. That's why the LES SL retains the same great fit and handling that has made the LES a favorite with our elite racers across multiple disciplines. New school cross country race geometry relies on slacker head angles, shorter stems, and longer reaches for the kind of stability that excels over the longest races and technical World Cup race courses with razor-sharp agility that makes it a short track racer's advantage.
Norco Aurum A1
$3,749.00
The Aurum Aluminum offers a DH-proven design in a premium aluminum frame and is built to be the ultimate DH park rig, happily churning out lap after lap at your favorite gravity-fueled destination throughout the season. Developed in collaboration with Norco Factory Racing, the Aurum A1’s World-Cup racing heritage will put any gravity junkie or passionate DH racer in the hot seat — at races and with your buddies during a day at the park. The Aurum A1 features Gravity Tune, with rear-center lengths that increase proportionately to the front center length for each frame size, achieving optimal body position and weight distribution for superior handling and control. The 6060-T6 frame includes strategic frame armor and integrated fork bump stops, with fender and shuttle guards for protection from day to day high speed riding and surprise get-offs. Designed around 27.5” wheels for strength and stiffness, the Aurum A1 provides 200mm of supple travel with its Fox Performance Vanilla LSC rear shock and RockShox Boxxer Select fork. With a tough, reliable Shimano Zee 10-speed DH drivetrain and 200mm SRAM Code R brakes, you’ll have all the performance and reliability you need for a day at the park without the massive repair bills.
Kona Process 134 DL 27.5
$3,699.00
For those people who prefer a 27.5-wheeled bike, or for those who are a bit shorter in stature, the Process 134 DL 27.5 is like hitting the jackpot. A killer spec featuring a RockShox Pike Select RC Charger DebonAir fork, Deluxe Ultimate rear shock, a SRAM GX/NX drivetrain, and SRAM G2 RS brakes make this bike a premium trail slayer. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning. 27.5"+ Wheels The benefits of the 27.5-inch wheel are simple: they roll over obstacles and track better than 26-inch wheels, but are more maneuverable and nimble than 29-inch ones.
Kona Process 134 DL 29
$3,699.00
The Process 134 DL 29 proved to be one of the most popular Konas of 2020. Was it the price? The spec? A combo of the two? We’re willing to bet this bike will be the belle of the ball again. Ultra-powerful SRAM G2 RS brakes keep speed in check while a RockShox Pike Select RC Charger DebonAir fork and Deluxe Ultimate shock provides a bottomless feel. Longer droppers are now coming stock in the smaller frame sizes, and with TranzX’s new +RAD post with adjustable travel, everyone will be able to find their sweet spot. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
Kona Process 153 DL 29
$3,699.00
The Process 153 DL 29 has been the racehorse of choice for enduro rippers all over the world. Featuring a RockShox Super Deluxe Select Plus shock and Lyrik Select RC Charger DebonAir fork, it stands up to all the hits. SRAM’s powerful G2 RS brakes put a stop to the chaos when needed. Aggressive Maxxis Assegai and Minion DHR tires wrapped around WTB KOM Trail rims keep the bike rolling fast and smooth. The new TranzX +RAD dropper provides adjustable travel, ensuring your seatpost is always the perfect height. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
Norco Aurum HSP Frame
$3,599.00
The Aurum HSP was created for one single purpose: to be the fastest downhill mountain bike available. The Aurum HSP's full carbon frame is engineered for maximum strength and increased vibration damping at speed. The High Single Pivot suspension relies on precision kinematics and a chain idler wheel to ensure the suspension absorbs any obstacle between you and victory, while remaining unaffected by drivetrain forces. The adjustable reach ensures easy adjustment for rider fit or preference. Available in both 27.5 and 29" models, the Aurum HSP features Norco's Gravity Tune geometry to provide the same ride characteristics and weight balance across all three frame sizes. Starting with this world-class frame, you get to determine every detail and scrutinize every part in building your ultimate descender to power around every corner and across the finish line for your time in the Hot Seat.
Page 1 of 3 Next page